Prasoon Prasannan; N.K. Deepak; P. Jayaram
Abstract
The variation of thermoelectric properties of Zr2O3-In2O3-ZnO film system is reported here. The films are fabricated in a chemical composition satisfies the relation ZrxInxZn1-xO1-δ, (0.01≥ x ≥ 0.04), through spray pyrolysis technique. XRD analysis shows a switching of preferred crystal growth ...
Read More
The variation of thermoelectric properties of Zr2O3-In2O3-ZnO film system is reported here. The films are fabricated in a chemical composition satisfies the relation ZrxInxZn1-xO1-δ, (0.01≥ x ≥ 0.04), through spray pyrolysis technique. XRD analysis shows a switching of preferred crystal growth orientation from (002) to (100) and (101) planes as x increases. The quasi spherical surface morphology was improved on the addition of the cations. A maximum Seebeck coefficient of -159 µV/K was obtained for x=0.01 at 400K. The decrease in the Seebeck coefficient for higher x values is explained with simplified broadband model. At elevated temperature power factor increased considerably up to 2.33 X 10-4 Wm-1K-2 for x=0.03 which was attributed to decrease in sheet resistance at high temperature.
Srashti Gupta; S. Neeleshwar; Vinod Kumar; Y.Y. Chen
Abstract
Bismuth telluride (Bi2Te3) nano particles were prepared by refluxing method in different conditions such as varying concentration of KOH and reaction timings. X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements have been performed for structural and phase formation studies. ...
Read More
Bismuth telluride (Bi2Te3) nano particles were prepared by refluxing method in different conditions such as varying concentration of KOH and reaction timings. X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements have been performed for structural and phase formation studies. The nanoparticles are showing the same structure of bulk except broadening of peak confirmed by XRD. The reaction time and KOH concentration are the key parameters to control the morphology and size of the particles. As the concentration of KOH increases, the particle size decreases from 23 to 15 nm and with increasing reaction time, nanorod like structures (~100 nm length and ~ 20 nm diameter) are formed.