Vinay Kumar; Pranjala Tiwari; Lucky Krishnia; Reetu Kumari; Anshika Singh; Arnab Ghosh; Pawan K. Tyagi
Abstract
Silica, generally known as silicon dioxide is insulating in nature whereas silicon is semiconducting. These two materials are widely used in sensing and electronic devices. In order to full-fill demand of silicon, sources other than sand, have to explore for silicon extraction. In this report, bamboo ...
Read More
Silica, generally known as silicon dioxide is insulating in nature whereas silicon is semiconducting. These two materials are widely used in sensing and electronic devices. In order to full-fill demand of silicon, sources other than sand, have to explore for silicon extraction. In this report, bamboo culms have been subjected to thermo chemical decomposition at high temperature (1250 °C) in an inert atmosphere. After pyrolysis, contents in residual of bamboo culms have been characterized by using scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray diffraction (XRD). Nanosized, pure crystalline Si has been formed. Si as well as charcoal is found to be crystalline in nature. No silicon carbide formation observed.
Reetu Kumari; Anshika Singh; Rajesh Kumar; Lucky Krishnia; Vinay Kumar; Nitin K. Puri; Pawan K. Tyagi
Abstract
In this report, we have illustrated the synthesis of the Ni-filled multiwalled carbon nanotubes (MWCNTs) on both metallic and non-metallic substrates, by using thermal CVD technique. Scanning Electron Microscopy (SEM) and X-ray diffraction (XRD) have been used to characterize the surface morphology and ...
Read More
In this report, we have illustrated the synthesis of the Ni-filled multiwalled carbon nanotubes (MWCNTs) on both metallic and non-metallic substrates, by using thermal CVD technique. Scanning Electron Microscopy (SEM) and X-ray diffraction (XRD) have been used to characterize the surface morphology and crystalline nature of the MWCNTs encapsulated with Ni nanorod. These filled MWCNTs have exhibited strong magnetic response due to encapsulation of pure phase of Ni. Magnetic Force Microscopy (MFM) study of such filled tubes reveals the pole formation in the Ni nanorod and confirms magnetization direction perpendicular to tube axis. Filling occurs in a fragmented manner confirmed by MFM and each fragment found to have north and south poles along the axis perpendicular to the tube i.e. radial direction of tube.
Lucky Krishnia; Reetu Kumari; Vinay Kumar; Anshika Singh; Preeti Garg; Brajesh S. Yadav; Pawan K. Tyagi
Abstract
Filled or un-filled multiwalled carbon nanotubes (CNTs) used in this study have been synthesized by the floating catalyst method and fixed catalyst method, respectively. The thermal stability of filled/un-filled carbon nanotubes has been investigated by using Thermogravimetric analysis (TGA) and Derivative ...
Read More
Filled or un-filled multiwalled carbon nanotubes (CNTs) used in this study have been synthesized by the floating catalyst method and fixed catalyst method, respectively. The thermal stability of filled/un-filled carbon nanotubes has been investigated by using Thermogravimetric analysis (TGA) and Derivative thermogravimetric (DTG) analysis. In this report, we have developed a methodology to distinguish between filled and un-filled carbon nanotubes. Filled-CNTs are found to be more resistant to oxidation than the un-filled carbon nanotubes. The calculated activation energy of as-grown filled CNTs, by using differential method, determined to be 3.29 ± 0.04 eV, which is higher than that of highly ordered pyrolytic graphite (HOPG). Carboneous impurities; amorphous carbon, catalyst and CNT of different diameter, which are structurally different, are identified by their reactivity and the resistance to oxidation.
