Ashish Gupta; Deoram V. Nandanwar; Sanjay R. Dhakate
Abstract
Zinc oxide (ZnO) nanoparticles, self-assembled in the form of one dimensional ZnO nanofibers were synthesized using electrospinning technique from solution of polyvinyl alcohol (PVA) and zinc acetate followed by calcination at 600°C in oxidizing environment. Scanning Electron Microscope (SEM) analysis ...
Read More
Zinc oxide (ZnO) nanoparticles, self-assembled in the form of one dimensional ZnO nanofibers were synthesized using electrospinning technique from solution of polyvinyl alcohol (PVA) and zinc acetate followed by calcination at 600°C in oxidizing environment. Scanning Electron Microscope (SEM) analysis demonstrates that morphology of ZnO nanofibers having rough surface and corresponding Energy Dispersive Spectrometry (EDAX) confirmed the Zn: O atomic ratio approximately in 50:50. Transmission electron microscopy (TEM) images clearly demonstrate the rough morphology is due to the self-assembling of ZnO nanoparticles having diameter approximately 50nm. X-ray Diffraction (XRD) reveals the polycrystalline structure and Raman spectra show some shifts in phonon modes. The PL graph show exceptional emission at 342nm due to band-band transition. Under solar radiations as produced ZnO nanofibers degrades the 99% of 25ppm acid fuchsine which proven through UV spectra when compared to blank dye solution. This shows that natural solar radiations are sufficient to excite theses self-assembled high surface area ZnO nanofibers to show its photocatalytic activity.
Anisha Chaudhary; Ashish Gupta; Rakesh B. Mathur; Sanjay R. Dhakate
Abstract
Electrospun nanofibers based antimicrobial filter were examined for their capability to build conductive environment. An antimicrobial agent, silver nitrate (AgNO3), was added to the nanofibers membrane for its ability to prevent growth of microorganisms over the filter media. In this direction in the ...
Read More
Electrospun nanofibers based antimicrobial filter were examined for their capability to build conductive environment. An antimicrobial agent, silver nitrate (AgNO3), was added to the nanofibers membrane for its ability to prevent growth of microorganisms over the filter media. In this direction in the present investigation the different fractions of silver nanoparticles were in-situ synthesized in PAN solution and then polyacrylonitrile (PAN)-silver composite nanofibers membrane filter was prepared by electrospinning technique. The resultant solution and PAN-silver composite nanofibers was characterized by UV–visible spectroscopy, scanning electron microscope, atomic force microscope and X-ray diffraction. Antibacterial property of PAN silver composite nanofibers were investigated against gram positive Staphylococcus aureus and gram negative Escherichia coli microorganisms. The formation of clear zone suggests that composite nanofibers containing silver nanoparticles show strong antibacterial activity and it increases with increasing silver content in the composite nanofibers. The PAN-silver composite nanofibers sheet was also examined for filtration of microorganisms and dust particles. It was observed that PAN-silver composite nanofibers filter proven to be an excellent filter for creating microorganism and dust free hygienic environment. Thus electrospun PAN nanofibers filters containing an antibacterial agent can be a promising solution for effective microorganism filtration from indoor air in hospitals or other places which are more prone to bacterial infections.
Subhash B. Kondawar; Smita A. Acharya; Sanjay R. Dhakate
Abstract
ZnO in different nanostructures were synthesized by microwave assisted hydrothermal route. Different experimental conditions such as microwave irradiation power, exposure time have been investigated to reveal the process of formation of the ZnO nanostructures. It was revealed that the microwave exposure ...
Read More
ZnO in different nanostructures were synthesized by microwave assisted hydrothermal route. Different experimental conditions such as microwave irradiation power, exposure time have been investigated to reveal the process of formation of the ZnO nanostructures. It was revealed that the microwave exposure time plays a vital role in determining the diameter of the rods. The interaction of microwaves with the growth units of ZnO was systematically investigated to explain formation of different structural geometry of ZnO on nanoscale. ZnO nanostructures consisted of flower-like, sword-like, needle-like and rods-like structures were prepared by microwave assisted hydrothermal process at different conditions of microwave power and irradiation time. The ZnO nanostructures are in hexagonal phase. It is considered that microwave can interact with growth units of ZnO to generate active centers on the surface of ZnO nuclei so that needle-like ZnO rods are created on those sites, resulting in the formation of the flower-like ZnO nanostructures. Polyaniline - ZnO nanocomposites (PZ) in various weight % of nanostructure ZnO were synthesized by the chemical oxidation method in sulphuric acid medium using ammonium persulphate as oxidant at 276K. The synthesized polymer nanocomposites were characterized by XRD, FTIR and UV-VIS spectroscopy.
