Volume 15 (2024)
Volume 14 (2023)
Volume 13 (2022)
Volume 12 (2021)
Volume 11 (2020)
Volume 10 (2019)
Volume 9 (2018)
Volume 8 (2017)
Volume 7 (2016)
Volume 6 (2015)
Volume 5 (2014)
Volume 3 ( 2012)
Volume 2 (2011)
Volume 1 (2010)
Advanced Materials World Congress (AMWC)

Ashutosh Tiwari

Volume 4, Issue 3 , March 2013, Pages 174-174

https://doi.org/10.5185/amlett.2013.3001

Abstract
  We are glad to announce Advanced Materials Word Congress (AMWC, http://www.amwc2013.org/) together with the International Association of Advanced Materials (www.iaamonline.org) and hosted by the Ä°zmir Institute of Technology in the beautiful coastal town ÇeÅŸme, Turkey at ...  Read More

Nanoscale Device for Veterinay Technology: Trends And Future Prospective

Neeraj Dilbaghi; Harmanmeet Kaur; Ritesh Kumar; Pooja Arora; Sandeep Kumar

Volume 4, Issue 3 , March 2013, Pages 175-184

https://doi.org/10.5185/amlett.2012.7399

Abstract
  Nanotechnology is an interdisciplinary science comprising of various disciplines such as physics, chemistry, electronics, material science, health science, biology and veterinary science. The ability to manufacture and manipulate material at nanoscale has offered opportunities to interface biological ...  Read More

Equivalent circuit models and analysis of impedance spectra of solid electrolyte  Na0.25Li0.75Zr2(PO4)3

U. Ahmadu; S. Tomas; S. A. Jonah; A. O. Musa; N. Rabiu

Volume 4, Issue 3 , March 2013, Pages 185-195

https://doi.org/10.5185/amlett.2012.7396

Abstract
  Two RC model circuits are connected in series in order to analyze the electrical and dielectric behaviour of mixed alkali Na0.25Li0.75Zr2(PO4)3 NASICON compound. However, the data obtained could best be described by one RC circuit representing the grain boundary resistance () and capacitance () in the ...  Read More

Low Temperature Sensing Of NO2 Gas Using SnO2-ZnO Nanocomposite Sensor
Volume 4, Issue 3 , March 2013, Pages 196-201

https://doi.org/10.5185/amlett.2012.7390

Abstract
  In the present work an effort has been made to synthesize nanocrystalline composites (NCC) of Zinc oxide and Tin oxide (ZSO) using chemical route for efficient sensing of NO2 gas at lower operating temperature. The structural, microstructural and optical information have been revealed by X-ray diffraction ...  Read More

Manganese Doped Cadmium Sulphide (CdS: Mn) quantum Particles: Topological, photoluminescence And Magnetic Studies

P. Venkatesu; K. Ravichandran

Volume 4, Issue 3 , March 2013, Pages 202-206

https://doi.org/10.5185/amlett.2012.7379

Abstract
  Nano-polycrystalline samples of cadmium sulphide doped with 0, 2, 4, 6, 8 and 10 atomic % of Mn were prepared by a template based chemical route. The presence of thiophenol as template on the surface of the samples has been detected with FTIR technique. Particle sizes of 15-50 nm range, hexagonal structure ...  Read More

Characterization and Photoluminescence Of Sr2CeO4: Eu+3, La+3

Ch. Atchyutha Rao; Poornachandra Rao V. Nannapaneni; K. V. R. Murthy

Volume 4, Issue 3 , March 2013, Pages 207-212

https://doi.org/10.5185/amlett.2012.7395

Abstract
  In this paper we report the synthesis and luminescence of strontium cerium oxide (Sr2CeO4:Eu 3+ (0.5mol%),La 3+ (0.5mol%) prepared by solid state reaction method in air at 12000C.These samples were characterized by X-ray diffraction, scanning electron microscope (SEM) and photoluminescence (PL) techniques, ...  Read More

Encapsulation of N,N-ethylenebis(salicylamide) Metal Complexes In Fly ash Based Zeolite, Characterization and Catalytic Activity

T. Peter Amaladhas; S. Sheeba Thavamani

Volume 4, Issue 3 , March 2013, Pages 213-219

https://doi.org/10.5185/amlett.2012.7380

Abstract
  Coal fly ash has been used to synthesize X-type zeolite by alkali fusion followed by hydrothermal treatment. The synthesized fly ash based zeolite (FAZ) has been characterized by various analytical techniques. Copper(II), Nickel(II) and Zinc(II) complexes of N,N 1 -ethylenebis (salicylamide) encapsulated ...  Read More

Study of optical And Ferroelectric Behavior Of ZnO Nanostructures

Prakash Chand; Anurag Gaur; Ashavani Kumar

Volume 4, Issue 3 , March 2013, Pages 220-224

https://doi.org/10.5185/amlett.2012.7391

Abstract
  In the present work, we have synthesized ZnO nanostructures by sol-gel method in air at different selected sintering temperatures ranging from room temperature to 400 0 C and studied their structural, optical and ferroelectric properties. The synthesized samples are characterized by X-ray diffractrometer ...  Read More

Effect of copper on composition, structural and optical properties of copper doped znte thin films

R. Amutha

Volume 4, Issue 3 , March 2013, Pages 225-229

https://doi.org/10.5185/amlett.2012.7387

Abstract
  Ultrathin (250 Å) initial deposit of copper on glass substrates were used for the subsequent deposition of ZnTe films under a pressure of 10 -5 m.bar by thermal evaporation method. The decrease of atomic percentage of copper with increase of the ZnTe film thickness is confirmed by EDAX analysis. ...  Read More

Friction Stir Processing Of Intermetallic particulate Reinforced Aluminum Matrix composite

G. Ashok Kumar; I. Dinaharan; S. J. Vijay; N. Murugan

Volume 4, Issue 3 , March 2013, Pages 230-234

https://doi.org/10.5185/amlett.2012.7398

Abstract
  Friction stir processing (FSP) is a novel solid state technique to refine the microstructure of metallic materials. The objective of this work is to apply FSP to change the morphology and distribution of intermetallic particles and achieve property enhancement. AA6061/8wt. % Al3Zr composite was produced ...  Read More

Effect Of Processing Conditions On Transient liquid Phase Sintering Of Premixed Aluminium alloy Powders

N. B. Dhokey; V. A. Athavale; N. Narkhede; M. Kamble

Volume 4, Issue 3 , March 2013, Pages 235-240

https://doi.org/10.5185/amlett.2012.8402

Abstract
  Aluminium powder metallurgy is attracting attention of many researchers for making near net shape components by replacing conventional process of liquid metallurgy. In the present work, sintering response of a 2xxx series aluminium powder premix, containing 4.5Cu-1Si-0.8Mg (by wt %) blended without any ...  Read More

Mechanical Properties Of Multifunctional Epoxy  resin/glass Fiber Reinforced Composites Modified  with Poly(ether Imide)

Jagrati Kandpal; Samar B. Yadaw; Arun K. Nagpal

Volume 4, Issue 3 , March 2013, Pages 241-249

https://doi.org/10.5185/amlett.2012.8403

Abstract
  In the present paper effect of thermoplastic on various mechanical and thermal properties of multifunctional epoxy resin have been studied. Epoxy phenol novolac resin has been cured with hardner diamino, diphenyl sulfone. Changes in mechanical and thermal properties of epoxy phenol novolac resin with ...  Read More

Book Review On Integrated Biomaterials For  biomedical Technology

Mehrdad Rafat

Volume 4, Issue 3 , March 2013, Pages 250-250

https://doi.org/10.5185/amlett.2013.3002

Abstract
  This book covers a wide range of biomaterials from polymers and ceramics to metals, composites, nanomaterials, and biosensor materials for various biomedical applications. I strongly recommend this book for those who have a basic knowledge in biomaterials who want to expand their knowledge and to know ...  Read More