Aparicio-Razo, Manuel
Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Araźna, Aneta
Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
B
Balliou, Angelika
Gas Sensing Investigation of Porous Hot-wire Molybdenum Disulphide Thin Films [Volume 13, Issue 1, 2022, Pages 2201-1689]
Bartha, Johann Wolfgang
Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Benavides, Miranda
Synthesis and thermomechanical behavior of SiC/Si compounds derived from wood waste [Volume 13, Issue 3, 2022]
C
Chandiri, Sudhakar Reddy
Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
Chandra Mouli, V.
Structural and Optical Studies of Quaternary Glass System [Volume 13, Issue 2, 2022, Pages 2202-1695]
Chavarin, Carlos
Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Che, Chang
Microstructural Evolution for Super304H Austenite Steel used in China Plants [Volume 13, Issue 2, 2022, Pages 2202-1694]
Chen, Daniel
Reactor Design for Manufacturing Carbon Hybrid Materials [Volume 13, Issue 1, 2022, Pages 2201-1685]
Cuzziramos, Fernando Alonso
Synthesis and thermomechanical behavior of SiC/Si compounds derived from wood waste [Volume 13, Issue 3, 2022]
Cuzziramos, Fernando Alonso
Synthesis and Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers [Volume 13, Issue 4, 2022]
Czaiński, Michał
Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
D
Dallal, Shawqi Al
Dye Enhanced Quantum Dot Sensitized Solar Cell [Volume 13, Issue 2, 2022, Pages 2202-1691]
Davazoglou, Dimitris
Gas Sensing Investigation of Porous Hot-wire Molybdenum Disulphide Thin Films [Volume 13, Issue 1, 2022, Pages 2201-1689]
Dossumov, Kusman
The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Dubecky, Daniel
Experimental Analysis of Composite Beams [Volume 13, Issue 3, 2022]
Dzigrashvili, Teimuraz
The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
E
Ezhilarasi, K.S.
Synthesis, Structural and Spectroscopic analysis, Thermodynamic and Micro hardness testing of a Chalcone molecule [Volume 13, Issue 2, 2022]
F
Fajstavr, Dominik
Preparation of (C/Ag) Nanocomposites Induced by High Excimer Laser [Volume 13, Issue 4, 2022]
Fountoulakis, Antonios
CO2 Permeation through Nanoporous graphene: a theoretical study [Volume 13, Issue 3, 2022]
Fthenakis, Zacharias
CO2 Permeation through Nanoporous graphene: a theoretical study [Volume 13, Issue 3, 2022]
G
Gaddameedi, Hima Bindu
Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
Gallegos, Daily Maria
Synthesis and Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers [Volume 13, Issue 4, 2022]
Gventsadze, David
The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
H
Huaman, Fredy Alberto
Synthesis and Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers [Volume 13, Issue 4, 2022]
Huaman-Mamani, Fredy Alberto
Synthesis and thermomechanical behavior of SiC/Si compounds derived from wood waste [Volume 13, Issue 3, 2022]
Hudepohl, Ronald
Reactor Design for Manufacturing Carbon Hybrid Materials [Volume 13, Issue 1, 2022, Pages 2201-1685]
Hurtukova, Klaudia
Preparation of (C/Ag) Nanocomposites Induced by High Excimer Laser [Volume 13, Issue 4, 2022]
Jalabadze, Nikoloz
The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Janeczek, Kamil
Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
Kadari, Ramaswamy
Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
Kammara, Vaishnavi
Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
Karumbaiah, Prathiksha
Removal of crystal violet dye using grafted guar gum along with nanoclay and MWCNT [Volume 13, Issue 1, 2022, Pages 2201-1686]
Kim, Sung Yong
Reactor Design for Manufacturing Carbon Hybrid Materials [Volume 13, Issue 1, 2022, Pages 2201-1685]
Knaut, Martin
Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Kościelski, Marek
Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
Kosyl, Mateusz
Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
Kouvatsos, Dimitris
Gas Sensing Investigation of Porous Hot-wire Molybdenum Disulphide Thin Films [Volume 13, Issue 1, 2022, Pages 2201-1689]
Krishna Priya, M.
Synthesis, Structural and Spectroscopic analysis, Thermodynamic and Micro hardness testing of a Chalcone molecule [Volume 13, Issue 2, 2022]
Kuruva, Praveena
Structural and Optical Studies of Quaternary Glass System [Volume 13, Issue 2, 2022, Pages 2202-1695]
Kutelia, Elguja
The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Kutová, Anna
Preparation of (C/Ag) Nanocomposites Induced by High Excimer Laser [Volume 13, Issue 4, 2022]
Kutová, Anna
Preparation of Bacterial Nanocellulose-Hydroxyapatite Composite [Volume 13, Issue 4, 2022]
Kvocak, Vincent
Experimental Analysis of Composite Beams [Volume 13, Issue 3, 2022]
L
Lathiotakis, Nektarios
CO2 Permeation through Nanoporous graphene: a theoretical study [Volume 13, Issue 3, 2022]
Lengyel, Andras
Effect of closely spaced knots on the failure mechanism of timber beams [Volume 13, Issue 3, 2022]
Leszczynski, Sebastian
Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Lipiec, Krzysztof
Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
M
Ma, Shaohai
Microstructural Evolution for Super304H Austenite Steel used in China Plants [Volume 13, Issue 2, 2022, Pages 2202-1694]
Mambetova, Manshuk
The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Mastoi, Ghulam Murtaza
Flake like Copper Oxide Nanostructures and their Application in Electrocatalytic Sensing of Growth-Promoting Agents [Volume 13, Issue 4, 2022]
Mayta, Denis Leonardo
Synthesis and thermomechanical behavior of SiC/Si compounds derived from wood waste [Volume 13, Issue 3, 2022]
Mayta, Denis
Synthesis and Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers [Volume 13, Issue 4, 2022]
Méndez, J. Flores
Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Mikolajick, Thomas
Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Mongalo-Vázquez, José Luis Jr.
Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Muga, Vithal
Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
N
Nadaraia, Lili
The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Navarro-Zárate, Adolfo
Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Naz, Gul
Flake like Copper Oxide Nanostructures and their Application in Electrocatalytic Sensing of Growth-Promoting Agents [Volume 13, Issue 4, 2022]
Pan, Qingchuan
Microstructural Evolution for Super304H Austenite Steel used in China Plants [Volume 13, Issue 2, 2022, Pages 2202-1694]
Papadimitropoulos, Giorgos
Gas Sensing Investigation of Porous Hot-wire Molybdenum Disulphide Thin Films [Volume 13, Issue 1, 2022, Pages 2201-1689]
Paredes-Juárez, Genaro Alberto
Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Perala, Venkataswamy
Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
Petsalakis, Ioannis
CO2 Permeation through Nanoporous graphene: a theoretical study [Volume 13, Issue 3, 2022]
Prasad, M.
Structural and Optical Studies of Quaternary Glass System [Volume 13, Issue 2, 2022, Pages 2202-1695]
Qian, Gong
Microstructural Evolution for Super304H Austenite Steel used in China Plants [Volume 13, Issue 2, 2022, Pages 2202-1694]
R
Reif, Johanna
Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Reuben Jonathan, D.
Synthesis, Structural and Spectroscopic analysis, Thermodynamic and Micro hardness testing of a Chalcone molecule [Volume 13, Issue 2, 2022]
Richter, Karola
Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Rodriguez, Gerhard Paul
Synthesis and thermomechanical behavior of SiC/Si compounds derived from wood waste [Volume 13, Issue 3, 2022]
Rodriguez, Gerhard Paúl
Synthesis and Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers [Volume 13, Issue 4, 2022]
Roy, Pratik
Removal of crystal violet dye using grafted guar gum along with nanoclay and MWCNT [Volume 13, Issue 1, 2022, Pages 2201-1686]
S
Saad, Khaled
Effect of closely spaced knots on the failure mechanism of timber beams [Volume 13, Issue 3, 2022]
Sailaja, R.R.N.
Removal of crystal violet dye using grafted guar gum along with nanoclay and MWCNT [Volume 13, Issue 1, 2022, Pages 2201-1686]
Santos-Enríquez, Víctor Hugo
Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Schulz, Mark
Reactor Design for Manufacturing Carbon Hybrid Materials [Volume 13, Issue 1, 2022, Pages 2201-1685]
Simran, Fiza
Removal of crystal violet dye using grafted guar gum along with nanoclay and MWCNT [Volume 13, Issue 1, 2022, Pages 2201-1686]
Singh, Vineet Kumar
Fabrication of n+-poly-Si/p+-c-Si tunnel diode using Low-pressure Chemical Vapor Deposition for Photovoltaic Applications [Volume 13, Issue 2, 2022, Pages 2202-1693]
Slepička, Petr
Preparation of (C/Ag) Nanocomposites Induced by High Excimer Laser [Volume 13, Issue 4, 2022]
Slepičková Kasálková, Nikola
Preparation of (C/Ag) Nanocomposites Induced by High Excimer Laser [Volume 13, Issue 4, 2022]
Solangi, Nizam
Flake like Copper Oxide Nanostructures and their Application in Electrocatalytic Sensing of Growth-Promoting Agents [Volume 13, Issue 4, 2022]
Solangi, Sorath
Flake like Copper Oxide Nanostructures and their Application in Electrocatalytic Sensing of Growth-Promoting Agents [Volume 13, Issue 4, 2022]
Sreenivasulu, V.
Structural and Optical Studies of Quaternary Glass System [Volume 13, Issue 2, 2022, Pages 2202-1695]
Stankiewicz, Beata
The resistance to UV radiation for GFRP pultruded bridge panels [Volume 13, Issue 3, 2022]
Stęplewski, Wojciech
Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
Strobel, Carsten
Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Sunku, Manasa
Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
T
Teng, Haipeng
A probability based methodology for multi object optimization in material selection [Volume 13, Issue 1, 2022, Pages 2201-1687]
Tiwari, Ashutosh
Priority of Materials Research for Reaching Climate Neutrality Goals [Volume 13, Issue 1, 2022, Pages 2201-1683]
Tiwari, Ashutosh
Hydrogen Leading the Green Energy Future [Volume 13, Issue 2, 2022, Pages 2202-1690]
Tiwari, Ashutosh
Climate Diplomacy to Attain Global Eco-Neutrality [Volume 13, Issue 3, 2022, Pages 2203-1697]
Tiwari, Ashutosh
Materials Advances to Achieve One World Climate [Volume 13, Issue 4, 2022]
Tsurtsumia, Olga
The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
U
Upender, G.
Structural and Optical Studies of Quaternary Glass System [Volume 13, Issue 2, 2022, Pages 2202-1695]
Usha, G.
Synthesis, Structural and Spectroscopic analysis, Thermodynamic and Micro hardness testing of a Chalcone molecule [Volume 13, Issue 2, 2022]
V
Vasanthi, R.
Synthesis, Structural and Spectroscopic analysis, Thermodynamic and Micro hardness testing of a Chalcone molecule [Volume 13, Issue 2, 2022]
Vivanco-Pérez, Israel
Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Voelkel, Sandra
Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
W
Wang, Yi
A probability based methodology for multi object optimization in material selection [Volume 13, Issue 1, 2022, Pages 2201-1687]
Weissova, Michala
Experimental Analysis of Composite Beams [Volume 13, Issue 3, 2022]
Wenger, Christian
Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Y
Yáñez Ramos, J. A.
Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Yan, Kai
Microstructural Evolution for Super304H Austenite Steel used in China Plants [Volume 13, Issue 2, 2022, Pages 2202-1694]
Yergasiyeva, Gaukhar
The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Z
Zheng, Maosheng
A probability based methodology for multi object optimization in material selection [Volume 13, Issue 1, 2022, Pages 2201-1687]
