A. Al-horaibi, Sultan
Synthesis, characterizations, and comparative study of electro-optical properties of indole-based squaraine sensitizers as efficiency to enhancing dye-sensitized solar cells [Volume 9, Issue 4, 2018, Pages 275-283]
A. Al-horaibi, Sultan
Symmetrical and unsymmetrical squaraine sensitizers for dye-sensitized solar cells: present day advances and future challenges [Volume 9, Issue 5, 2018, Pages 353-362]
A. Alvarez, Vera
Polycaprolactone/organoclay biodegradable nanocomposites: dissimilar tendencies of different clay modifiers [Volume 9, Issue 11, 2018, Pages 796-804]
Aa. Sørensen, John
Towards airflow sensors with energy harvesting and wireless transmitting properties [Volume 9, Issue 5, 2018, Pages 311-319]
A. Barandun, Gion
Biocomposites based on plant material [Volume 9, Issue 12, 2018, Pages 876-879]
A. Baron-Miranda, Javier
Optical and electrical properties of graphene oxide and reduced graphene oxide films deposited onto glass and Ecoflex® substrates towards organic solar cells [Volume 9, Issue 1, 2018, Pages 58-65]
Abdullah, Saad
Design of FES based muscle stimulator device using EMG and insole force resistive sensors for foot drop patients [Volume 9, Issue 11, 2018, Pages 776-780]
A. Bogdanowicz, Krzysztof
Optical and electrical properties of graphene oxide and reduced graphene oxide films deposited onto glass and Ecoflex® substrates towards organic solar cells [Volume 9, Issue 1, 2018, Pages 58-65]
Abusaif, Nuha
Surface reinforcement of metals by carbon nanomaterials followed by high intense energy irradiation [Volume 9, Issue 10, 2018, Pages 733-736]
A. Carreño Diaz*, Luz
Effect of the BMIM BF4 immobilization on oxidized activated carbon in fuel desulfurization [Volume 9, Issue 7, 2018, Pages 488-493]
Aceves-Mijares, M.
Waveguide-detector system on silicon for sensor application [Volume 9, Issue 2, 2018, Pages 116-122]
A. de Farias, Marcelo
Effect of graphite nanosheets on electrical, electromagnetic, mechanical and morphological characteristics of PHBV/GNS nanocomposites [Volume 9, Issue 7, 2018, Pages 499-504]
A. Dias, Jeferson
Composites of phenolic resin with expanded graphite and conductive carbon black [Volume 9, Issue 2, 2018, Pages 107-111]
A. Esmaeili, A.
A sensitive electrochemical aptasensor based on single wall carbon nanotube modified screen printed electrode for detection of Escherichia coli O157:H7 [Volume 9, Issue 5, 2018, Pages 369-374]
Agasti, Nityananda
Synthesis and characterization of stearic acid capped silver nanoparticles: pH dependent stabilization and colorimetric detection of Hg(II) in water [Volume 9, Issue 1, 2018, Pages 53-57]
A. Gawande, Sushrut
Evaluation of mild steel hollow and foam filled circular tubes under axial loading [Volume 9, Issue 9, 2018, Pages 660-664]
A. González-Fernández, A.
Waveguide-detector system on silicon for sensor application [Volume 9, Issue 2, 2018, Pages 116-122]
Aguiar-Ricardo, Ana
Synthesis of fluorescent water-soluble oligo (oxazoline-ethylenimine) block copolymers [Volume 9, Issue 5, 2018, Pages 383-386]
A. Gurovich, Boris
Structure and properties degradation of the nuclear graphite under neutron irradiation [Volume 9, Issue 11, 2018, Pages 781-788]
Ahmed, Ayub
Evaluation of use of bottom ash in cement masonry and concrete regarding their mechanical properties [Volume 9, Issue 8, 2018, Pages 553-558]
A. Hocevar, Marcele
Effect of graphite nanosheets on electrical, electromagnetic, mechanical and morphological characteristics of PHBV/GNS nanocomposites [Volume 9, Issue 7, 2018, Pages 499-504]
A. Khan, Muhammad
Design of FES based muscle stimulator device using EMG and insole force resistive sensors for foot drop patients [Volume 9, Issue 11, 2018, Pages 776-780]
A. Kuleshov, Denis
Structure and properties degradation of the nuclear graphite under neutron irradiation [Volume 9, Issue 11, 2018, Pages 781-788]
A. Kumaraswamidhas, L.
Evaluation of mild steel hollow and foam filled circular tubes under axial loading [Volume 9, Issue 9, 2018, Pages 660-664]
Alarcón-Salazar, J.
Waveguide-detector system on silicon for sensor application [Volume 9, Issue 2, 2018, Pages 116-122]
Al-Jaberi, Zuhair
Behavior of EB FRP masonry bond under service temperature [Volume 9, Issue 11, 2018, Pages 753-759]
A. Lucas, Alessandra
Composites of phenolic resin with expanded graphite and conductive carbon black [Volume 9, Issue 2, 2018, Pages 107-111]
Alvarado-Martínez, Enrique
Conjugate-like addition of soft nucleophiles to 8-alkenylBODIPYs [Volume 9, Issue 6, 2018, Pages 426-431]
A. Maltsev, Dmitriy
Structure and properties degradation of the nuclear graphite under neutron irradiation [Volume 9, Issue 11, 2018, Pages 781-788]
A. Mercadal, Pablo
Plasmonic sensing through bioconjugation of Ag nanoparticles: Towards the development of immunoassays for ultralow quantification of antigens in colloidal dispersions [Volume 9, Issue 6, 2018, Pages 456-461]
A. Morawski, Waldemar
Microporous carbon spheres modified with EDA used as carbon dioxide sorbents [Volume 9, Issue 6, 2018, Pages 432-435]
Anbharasi, Vanangamudi
Highly hydrophilic copolymer based PES hollow fibre ultrafiltration membranes [Volume 9, Issue 1, 2018, Pages 25-30]
Andersson, Rickard
Nanoparticles-enabled low temperature growth of carbon nanofibers and their properties for supercapacitors [Volume 9, Issue 6, 2018, Pages 444-449]
Andersson, Stefan
Synthesis and modelling of nanoparticles for chemical looping reforming [Volume 9, Issue 6, 2018, Pages 439-443]
Andreas Arie, Arenst
Effects of C60 film coating on the electrochemical performance of composite LiCoO2 cathodes for lithium secondary batteries [Volume 9, Issue 2, 2018, Pages 138-141]
Anil Kumar, R.
Naphthol bis-indole derivative as an anode material for aqueous rechargeable lithium ion battery [Volume 9, Issue 8, 2018, Pages 594-601]
Antonova, Irina
Stability of graphene suspensions in an aqueous based multi-component medium [Volume 9, Issue 3, 2018, Pages 211-215]
Antony Prince, James
Highly hydrophilic copolymer based PES hollow fibre ultrafiltration membranes [Volume 9, Issue 1, 2018, Pages 25-30]
A. Popovich, Anatoly
Thermal plasma spheroidization of Nb-16Si powder alloy obtained by mechanical alloying [Volume 9, Issue 1, 2018, Pages 86-90]
Armyanov, Stephan
Electroless deposition of nickel on biocompatible poly(dimethylsiloxane) after a laser processing as a pretreatment [Volume 9, Issue 2, 2018, Pages 101-106]
A. Salazar Vega, Magda
Effect of the BMIM BF4 immobilization on oxidized activated carbon in fuel desulfurization [Volume 9, Issue 7, 2018, Pages 488-493]
A. Shevlin, Stephen
Synthesis and modelling of nanoparticles for chemical looping reforming [Volume 9, Issue 6, 2018, Pages 439-443]
Asthana, Saket
Improved electrical and photoluminescence properties in Nd substitution of 0.94(Na0.5Bi0.5TiO3)-0.06BaTiO3 lead free multi-functional ceramics [Volume 9, Issue 9, 2018, Pages 656-659]
Atanasov, Petar
Electroless deposition of nickel on biocompatible poly(dimethylsiloxane) after a laser processing as a pretreatment [Volume 9, Issue 2, 2018, Pages 101-106]
Avasthi, D.K.
Swift heavy ion induced modifications in the structural, optical and methane sensing properties of indium oxide thin films - A comparative study using Ag9+ and O7+ ion irradiation [Volume 9, Issue 7, 2018, Pages 481-487]
Axelevitch, Alexander
Plasmonic sensor for evaluation of the neuropeptides level in the human fluids [Volume 9, Issue 4, 2018, Pages 306-310]
Aziz, Anver
Swift heavy ion induced modifications in the structural, optical and methane sensing properties of indium oxide thin films - A comparative study using Ag9+ and O7+ ion irradiation [Volume 9, Issue 7, 2018, Pages 481-487]
B
Baca, Martin
Multilayer ceramics as integration platform for sensors in in-vitro cell culture reactors [Volume 9, Issue 11, 2018, Pages 748-752]
Bajpai, Vivek
Metal matrix nano composites using graphene nano platelets indented on copper particles in aluminium matrix [Volume 9, Issue 9, 2018, Pages 652-655]
Bakalinska, Olga
Mechanism of destruction of benzoyl peroxide on surface of sp2-type carbon nanomaterials [Volume 9, Issue 6, 2018, Pages 450-455]
Balasubramaniam, Gowtham
Experimental investigation of oxidation resistance of SiC powder for the protection of re-entry space vehicle using material shock tube [Volume 9, Issue 7, 2018, Pages 510-515]
Barannikova, Svetlana
On the deformation behavior of bi-metal via digital image correlation [Volume 9, Issue 1, 2018, Pages 20-24]
Baran Pati, Palas
Preparation of polymer nano-photocatalysts by using triton X-100 to improve performance of photocatalytic hydrogen generation [Volume 9, Issue 5, 2018, Pages 326-330]
Barman, Rahul
Effect of Mg content in Ag/Zn1-XMgXO/Cu structure for bipolar resistive switching performances [Volume 9, Issue 3, 2018, Pages 153-157]
B. Arote, Rohidas
Efficient siRNA delivery using osmotically active and biodegradable poly(ester amine) [Volume 9, Issue 8, 2018, Pages 590-593]
Bartholomew, Marquise
Fabrication and magnetic properties of Sol-Gel derived NiZn ferrite thin films for microwave applications [Volume 9, Issue 5, 2018, Pages 345-352]
Bartsch, Heike
Multilayer ceramics as integration platform for sensors in in-vitro cell culture reactors [Volume 9, Issue 11, 2018, Pages 748-752]
Baruah;Devasish Chowdhury, Upama
Functionalized graphene oxide as an electrochemical sensing platform for detection of Bisphenol A [Volume 9, Issue 7, 2018, Pages 516-525]
Bava Bakrudeen, S.P.Suriyaraj;H.
Carvedilol drug-organo montmorillonite nanocomposites: Preparation, characterization and drug release studies [Volume 9, Issue 4, 2018, Pages 258-265]
Beiderman, Yevgeny
Remote photonic sensing of glucose concentration via analysis of time varied speckle patterns [Volume 9, Issue 9, 2018, Pages 624-628]
Bera;Bhanu B. Khatua, Ranadip
Ternary hybrid electrode material based on polyaniline/carbon nanohorn/TiO2 with high performance energy storage capacity [Volume 9, Issue 4, 2018, Pages 234-240]
Bertholdo, Roberto
Composites of phenolic resin with expanded graphite and conductive carbon black [Volume 9, Issue 2, 2018, Pages 107-111]
Bhandari, Hema
Corrosion protection of mild steel by environment friendly Polypyrrole/Gum Acacia Composite Coatings [Volume 9, Issue 3, 2018, Pages 158-168]
Bhatnagar, Abhinav
Enhancing absorption in thin film organometal trihalide perovskite solar cell by photon recycling [Volume 9, Issue 10, 2018, Pages 721-726]
Bhattacharyya, Debes
Understanding the applicability of natural fibre composites in hybrid folded structures [Volume 9, Issue 9, 2018, Pages 619-623]
Bhuvana, Sowrirajalu
Highly hydrophilic copolymer based PES hollow fibre ultrafiltration membranes [Volume 9, Issue 1, 2018, Pages 25-30]
Biedunkiewicz, Anna
Composites of AISI 316L stainless steel and nanocrystalline Ti-B-C ceramic powders [Volume 9, Issue 10, 2018, Pages 696-702]
B. Kondawar, Subhash
Highly sensitive hydrogen gas sensor based on Al-doped SnO2/Polyaniline composite nanofibers [Volume 9, Issue 3, 2018, Pages 182-187]
B. Kondawar, Subhash
Polypyrrole/MnO2 nanocomposites as potential electrodes for supercapacitor [Volume 9, Issue 8, 2018, Pages 538-543]
Blajan, Marius
XPS analysis of the skin treated by microplasma [Volume 9, Issue 4, 2018, Pages 301-305]
Blaszczyk, Tomasz
Towards airflow sensors with energy harvesting and wireless transmitting properties [Volume 9, Issue 5, 2018, Pages 311-319]
Bo, Wang
Formation of carbon sp3 hybridization bonds in local electric fields of composites “polymer-CNT” [Volume 9, Issue 4, 2018, Pages 296-300]
Bo, Wang
Mechanism of destruction of benzoyl peroxide on surface of sp2-type carbon nanomaterials [Volume 9, Issue 6, 2018, Pages 450-455]
Bodziony, Tomasz
Composites of AISI 316L stainless steel and nanocrystalline Ti-B-C ceramic powders [Volume 9, Issue 10, 2018, Pages 696-702]
Borduin, Russell
A review on humidification membrane materials for fuel cells [Volume 9, Issue 4, 2018, Pages 225-233]
C
Caballero-Briones, Felipe
Optical and electrical properties of graphene oxide and reduced graphene oxide films deposited onto glass and Ecoflex® substrates towards organic solar cells [Volume 9, Issue 1, 2018, Pages 58-65]
Califa, Ran
Remote photonic sensing of glucose concentration via analysis of time varied speckle patterns [Volume 9, Issue 9, 2018, Pages 624-628]
Cao, Yunqi
Programming emissivity on fully integrated VO2 windows [Volume 9, Issue 6, 2018, Pages 406-410]
Carvalho, Tamires
Palm oil fatty acids and carotenoids extraction with lipase immobilized in magnetic nanoparticles [Volume 9, Issue 9, 2018, Pages 643-646]
C. Folgueras, Luiza
Effect of graphite nanosheets on electrical, electromagnetic, mechanical and morphological characteristics of PHBV/GNS nanocomposites [Volume 9, Issue 7, 2018, Pages 499-504]
C. Fraire, Juan
Plasmonic sensing through bioconjugation of Ag nanoparticles: Towards the development of immunoassays for ultralow quantification of antigens in colloidal dispersions [Volume 9, Issue 6, 2018, Pages 456-461]
Chanda, Avishek
Understanding the applicability of natural fibre composites in hybrid folded structures [Volume 9, Issue 9, 2018, Pages 619-623]
Chandrashekhara, K.
Behavior of EB FRP masonry bond under service temperature [Volume 9, Issue 11, 2018, Pages 753-759]
Chang, Chia-Wei
Preparation of WS2 Nanosheets from Lithium Intercalation for Hydrogen Evolution [Volume 9, Issue 2, 2018, Pages 128-131]
Chang Tseng, Ryan
Template-assisted fabrication of tunable aspect ratio, biocompatible iron oxide pillar arrays [Volume 9, Issue 4, 2018, Pages 249-257]
Chen, Dongmei
A review on humidification membrane materials for fuel cells [Volume 9, Issue 4, 2018, Pages 225-233]
Chen, Yu-Shun
Preparation of WS2 Nanosheets from Lithium Intercalation for Hydrogen Evolution [Volume 9, Issue 2, 2018, Pages 128-131]
Chen, Zhikang
Properties of the photochromic latexes based on spiropyran by emulsion polymerization [Volume 9, Issue 2, 2018, Pages 97-100]
Choi, Young-Bong
Glucose detection via Ru-mediated catalytic reaction of glucose dehydrogenase [Volume 9, Issue 3, 2018, Pages 220-224]
Chopra;Sundeep K. Dhawan, Haritma
Corrosion protection of mild steel by environment friendly Polypyrrole/Gum Acacia Composite Coatings [Volume 9, Issue 3, 2018, Pages 158-168]
C. Rezende, Mirabel
Effect of graphite nanosheets on electrical, electromagnetic, mechanical and morphological characteristics of PHBV/GNS nanocomposites [Volume 9, Issue 7, 2018, Pages 499-504]
C. Roncoleta, Renata
Assembly and characterization of ZnO nanoparticles for Grätzel's solar cells [Volume 9, Issue 4, 2018, Pages 284-290]
Cui, Yanyan
Properties of the photochromic latexes based on spiropyran by emulsion polymerization [Volume 9, Issue 2, 2018, Pages 97-100]
Cui;Jacek Lagowski, Jie
Work function and induced band bending characterization for engineering of selective contact for solar cells [Volume 9, Issue 9, 2018, Pages 629-631]
C. Wells, Hannah
Fibril orientation and strength in collagen materials and adaptation to strain [Volume 9, Issue 6, 2018, Pages 411-418]
D
Danan, Yossef
Sensitivity enhanced photo-thermal borders detection in bio-phantoms enriched with gold nanoparticles [Volume 9, Issue 7, 2018, Pages 471-475]
Das, Santanu
Graphene-metal oxide nanocomposites for supercapacitors: A perspective review [Volume 9, Issue 1, 2018, Pages 2-19]
Davazoglou, D.
The effect of growth time and oxygen flow on the properties of electrochromic WO3 thin layers grown by LPCVD [Volume 9, Issue 8, 2018, Pages 578-584]
Davazoglou;E. Koudoumas, D.
Effect of deposition temperature on the electrochromic properties of WO3 grown by LPCVD [Volume 9, Issue 3, 2018, Pages 192-198]
D. B. Bonifácio, Vasco
Synthesis of fluorescent water-soluble oligo (oxazoline-ethylenimine) block copolymers [Volume 9, Issue 5, 2018, Pages 383-386]
D. Cogollo Valdes, Misael
Effect of the BMIM BF4 immobilization on oxidized activated carbon in fuel desulfurization [Volume 9, Issue 7, 2018, Pages 488-493]
Demianenko, Yevgen
Mechanism of destruction of benzoyl peroxide on surface of sp2-type carbon nanomaterials [Volume 9, Issue 6, 2018, Pages 450-455]
Deng, Kaimo
Hydrogenated TiO2 as efficient electron transport layer of planar perovskite solar cell [Volume 9, Issue 6, 2018, Pages 419-425]
Desmaris, Vincent
Nanoparticles-enabled low temperature growth of carbon nanofibers and their properties for supercapacitors [Volume 9, Issue 6, 2018, Pages 444-449]
Dewangan, Khemchand
Synthesis of α-MoO3 nanofibers for enhanced field-emission properties [Volume 9, Issue 8, 2018, Pages 585-589]
D. Fedorovich, Sergei
Surface reinforcement of metals by carbon nanomaterials followed by high intense energy irradiation [Volume 9, Issue 10, 2018, Pages 733-736]
D. O. Barceinas-Sánchez, José
Optical and electrical properties of graphene oxide and reduced graphene oxide films deposited onto glass and Ecoflex® substrates towards organic solar cells [Volume 9, Issue 1, 2018, Pages 58-65]
Dou, Su
Phosphorus/reduced graphene oxide nanocomposite for high-performance anode of sodium-ion batteries [Volume 9, Issue 5, 2018, Pages 331-335]
D. Shah, Kinjal
Redox-active cerium oxide based nanozyme abrogate the organophosphate mediated poisoning in mammalian cells [Volume 9, Issue 10, 2018, Pages 737-747]
Duo Wu, Winston
The future of physical hydrogen storage [Volume 9, Issue 12, 2018, Pages 851-854]
Dvorsky, Tomas
Effect of selected cellulosic fibers on the properties of cement based composites [Volume 9, Issue 8, 2018, Pages 606-609]
Dzigrashvili, T.
Nucleation and growth of carbon nanoforms on the surface of metallic plate-substrates and the mechanism of their doping with the clusters of ferromagnetic atoms [Volume 9, Issue 12, 2018, Pages 867-871]
Dzigrashvili, Teimuraz
Investigation of new antifrictional/frictional nanocomposites based on PTFE matrix filled with Fe-doped carbon nanoparticles [Volume 9, Issue 5, 2018, Pages 320-325]
E
E. Motaung, Tshwafo
Effect of reaction time on LiMn2O4 nanostructures prepared by modified chemical bath deposition method [Volume 9, Issue 10, 2018, Pages 703-707]
Enoki, Manabu
Hydrogen concentration behavior of y-grooved weld joint based on a coupled analysis of heat transfer - thermal stress - hydrogen diffusion [Volume 9, Issue 10, 2018, Pages 677-683]
Enoksson, Peter
Nanoparticles-enabled low temperature growth of carbon nanofibers and their properties for supercapacitors [Volume 9, Issue 6, 2018, Pages 444-449]
E. Zaldívar-Huerta, I.
Waveguide-detector system on silicon for sensor application [Volume 9, Issue 2, 2018, Pages 116-122]
F
Fai NG, Pui
Investigation on stability and photocatalysis of perovskites [Volume 9, Issue 8, 2018, Pages 549-552]
Fei, Bin
Investigation on stability and photocatalysis of perovskites [Volume 9, Issue 8, 2018, Pages 549-552]
Feng, Chuanqi
ZnSn(OH)6 nanocubes as a high-performance anode for lithium-ion batteries [Volume 9, Issue 12, 2018, Pages 880-884]
Feng, Na
Phosphorus/reduced graphene oxide nanocomposite for high-performance anode of sodium-ion batteries [Volume 9, Issue 5, 2018, Pages 331-335]
Fernández Rojas, Marisol
Effect of the BMIM BF4 immobilization on oxidized activated carbon in fuel desulfurization [Volume 9, Issue 7, 2018, Pages 488-493]
Fernekorn, Uta
Multilayer ceramics as integration platform for sensors in in-vitro cell culture reactors [Volume 9, Issue 11, 2018, Pages 748-752]
F. F. Amaral, Priscilla
Palm oil fatty acids and carotenoids extraction with lipase immobilized in magnetic nanoparticles [Volume 9, Issue 9, 2018, Pages 643-646]
Figiel, Pawal
Composites of AISI 316L stainless steel and nanocrystalline Ti-B-C ceramic powders [Volume 9, Issue 10, 2018, Pages 696-702]
Figueroa, José
Programming emissivity on fully integrated VO2 windows [Volume 9, Issue 6, 2018, Pages 406-410]
F. Koao, Lehlohonolo
Effect of reaction time on LiMn2O4 nanostructures prepared by modified chemical bath deposition method [Volume 9, Issue 10, 2018, Pages 703-707]
F. Pires, Rita
Synthesis of fluorescent water-soluble oligo (oxazoline-ethylenimine) block copolymers [Volume 9, Issue 5, 2018, Pages 383-386]
French, PJ
Coatings for sensing and protection in silicon sensors [Volume 9, Issue 6, 2018, Pages 392-399]
Fu, Liuwa
Properties of the photochromic latexes based on spiropyran by emulsion polymerization [Volume 9, Issue 2, 2018, Pages 97-100]
Fu, Yang
Facile synthesis of graphene quantum dots based on electrochemical method and their application for specific Fe3+ detection [Volume 9, Issue 9, 2018, Pages 614-618]
Gaikwad, S.T.
Synthesis, characterizations, and comparative study of electro-optical properties of indole-based squaraine sensitizers as efficiency to enhancing dye-sensitized solar cells [Volume 9, Issue 4, 2018, Pages 275-283]
Gaikwad, S.T.
Symmetrical and unsymmetrical squaraine sensitizers for dye-sensitized solar cells: present day advances and future challenges [Volume 9, Issue 5, 2018, Pages 353-362]
Garc, Javier
Remote photonic sensing of glucose concentration via analysis of time varied speckle patterns [Volume 9, Issue 9, 2018, Pages 624-628]
G. Haverkamp, Richard
Fibril orientation and strength in collagen materials and adaptation to strain [Volume 9, Issue 6, 2018, Pages 411-418]
G. Razumov, Nikolay
Thermal plasma spheroidization of Nb-16Si powder alloy obtained by mechanical alloying [Volume 9, Issue 1, 2018, Pages 86-90]
Grebenyuk, Anatoliy
Mechanism of destruction of benzoyl peroxide on surface of sp2-type carbon nanomaterials [Volume 9, Issue 6, 2018, Pages 450-455]
G. Renda, Carmen
Composites of phenolic resin with expanded graphite and conductive carbon black [Volume 9, Issue 2, 2018, Pages 107-111]
Gu, Bangkai
Hydrogenated TiO2 as efficient electron transport layer of planar perovskite solar cell [Volume 9, Issue 6, 2018, Pages 419-425]
Gu, Changzhi
Reducing edge effect of temperature-field for large area thin film deposition in hot filament chemical vapor deposition system [Volume 9, Issue 10, 2018, Pages 727-732]
Guerrero-Contreras, Jesus
Optical and electrical properties of graphene oxide and reduced graphene oxide films deposited onto glass and Ecoflex® substrates towards organic solar cells [Volume 9, Issue 1, 2018, Pages 58-65]
Guo, Zaiping
ZnSn(OH)6 nanocubes as a high-performance anode for lithium-ion batteries [Volume 9, Issue 12, 2018, Pages 880-884]
Gupta, Manoj
Electromagnetic shielding capability of magnesium based materials: A review [Volume 9, Issue 5, 2018, Pages 387-391]
Gupta, Rajiv
Evaluation of use of bottom ash in cement masonry and concrete regarding their mechanical properties [Volume 9, Issue 8, 2018, Pages 553-558]
Gventsadze, D.
Nucleation and growth of carbon nanoforms on the surface of metallic plate-substrates and the mechanism of their doping with the clusters of ferromagnetic atoms [Volume 9, Issue 12, 2018, Pages 867-871]
Gventsadze, David
Investigation of new antifrictional/frictional nanocomposites based on PTFE matrix filled with Fe-doped carbon nanoparticles [Volume 9, Issue 5, 2018, Pages 320-325]
H
Haddad, Hadjira
Study of the properties of La-doped ZnS thin Films synthesized by Sol-gel method [Volume 9, Issue 3, 2018, Pages 216-219]
H. Alghazali, Hayder
Structural performance of severely damaged reinforced concrete beams after SRP repair [Volume 9, Issue 11, 2018, Pages 789-795]
Haliarnyk, Daryna
Mechanism of destruction of benzoyl peroxide on surface of sp2-type carbon nanomaterials [Volume 9, Issue 6, 2018, Pages 450-455]
Hameiri, Ziv
Work function and induced band bending characterization for engineering of selective contact for solar cells [Volume 9, Issue 9, 2018, Pages 629-631]
Hele, Zhang
Effect of electrode material on piezoelectric output of PVDF sensor with electrospun nanofiber web [Volume 9, Issue 5, 2018, Pages 363-368]
H. Hurt, Robert
New material architectures through graphene nanosheet assembly [Volume 9, Issue 12, 2018, Pages 843-850]
Hidalgo, Pilar
Assembly and characterization of ZnO nanoparticles for Grätzel's solar cells [Volume 9, Issue 4, 2018, Pages 284-290]
Himmerlich, Marcel
Multilayer ceramics as integration platform for sensors in in-vitro cell culture reactors [Volume 9, Issue 11, 2018, Pages 748-752]
H. M. Al-Zandi, Muaiyd
Design of a novel three arm electrothermal microgripper with multiple degrees of control [Volume 9, Issue 10, 2018, Pages 692-695]
Hon, Min-Hsiung
Preparation of WS2 Nanosheets from Lithium Intercalation for Hydrogen Evolution [Volume 9, Issue 2, 2018, Pages 128-131]
H. O. Nogueira, Pedro
Assembly and characterization of ZnO nanoparticles for Grätzel's solar cells [Volume 9, Issue 4, 2018, Pages 284-290]
Hospodarova, Viola
Effect of selected cellulosic fibers on the properties of cement based composites [Volume 9, Issue 8, 2018, Pages 606-609]
Housaindokht, M.R.
A sensitive electrochemical aptasensor based on single wall carbon nanotube modified screen printed electrode for detection of Escherichia coli O157:H7 [Volume 9, Issue 5, 2018, Pages 369-374]
H. Sizeland, Katie
Fibril orientation and strength in collagen materials and adaptation to strain [Volume 9, Issue 6, 2018, Pages 411-418]
H. Tolbert, Sarah
Fabrication and magnetic properties of Sol-Gel derived NiZn ferrite thin films for microwave applications [Volume 9, Issue 5, 2018, Pages 345-352]
H. Tran, Vinh
Composites of AISI 316L stainless steel and nanocrystalline Ti-B-C ceramic powders [Volume 9, Issue 10, 2018, Pages 696-702]
H. Turkenburg, D.
Reversible cross-linking in composite binders - in-situ repair options and recyclability [Volume 9, Issue 12, 2018, Pages 861-866]
Hu, Weiguo
Phosphorus/reduced graphene oxide nanocomposite for high-performance anode of sodium-ion batteries [Volume 9, Issue 5, 2018, Pages 331-335]
Huynh, Tien
Inherent species characteristic influence and growth performance assessment for mycelium composite applications [Volume 9, Issue 1, 2018, Pages 71-80]
Hwang, Nong-Moon
Effect of the substrate bias in diamond deposition during hot filament chemical vapor deposition: Approach by non-classical crystallization [Volume 9, Issue 9, 2018, Pages 638-642]
Hye Ahn, Min
Efficient siRNA delivery using osmotically active and biodegradable poly(ester amine) [Volume 9, Issue 8, 2018, Pages 590-593]
I. González, Jazmín
Mechanical properties of hydroxyapatite scaffolds produced by gel-casting and combination gel-casting/polymer foams infiltration [Volume 9, Issue 4, 2018, Pages 266-274]
Inge Dahl, Paul
Synthesis and modelling of nanoparticles for chemical looping reforming [Volume 9, Issue 6, 2018, Pages 439-443]
Ishikawa, Nobuyuki
Hydrogen concentration behavior of y-grooved weld joint based on a coupled analysis of heat transfer - thermal stress - hydrogen diffusion [Volume 9, Issue 10, 2018, Pages 677-683]
I. Shtrombakh, Yaroslav
Structure and properties degradation of the nuclear graphite under neutron irradiation [Volume 9, Issue 11, 2018, Pages 781-788]
Iwan, Agnieszka
Optical and electrical properties of graphene oxide and reduced graphene oxide films deposited onto glass and Ecoflex® substrates towards organic solar cells [Volume 9, Issue 1, 2018, Pages 58-65]
J
Jalabadze, Nikoloz
Investigation of new antifrictional/frictional nanocomposites based on PTFE matrix filled with Fe-doped carbon nanoparticles [Volume 9, Issue 5, 2018, Pages 320-325]
Janati-Fard, F.
A sensitive electrochemical aptasensor based on single wall carbon nanotube modified screen printed electrode for detection of Escherichia coli O157:H7 [Volume 9, Issue 5, 2018, Pages 369-374]
Januszko, Adam
Optical and electrical properties of graphene oxide and reduced graphene oxide films deposited onto glass and Ecoflex® substrates towards organic solar cells [Volume 9, Issue 1, 2018, Pages 58-65]
Janyani, Vijay
Enhancing absorption in thin film organometal trihalide perovskite solar cell by photon recycling [Volume 9, Issue 10, 2018, Pages 721-726]
J.B. Heffernan, William
Joule heating of logs for phytosanitary purposes and timber processing pre-treatment [Volume 9, Issue 11, 2018, Pages 767-775]
J. Bhongale, Chetan
Templated synthesis of mesoscopic titania and its application in the solid-state dye-sensitized solar cells [Volume 9, Issue 2, 2018, Pages 148-152]
J. Cely Pinto, Melissa
Effect of the BMIM BF4 immobilization on oxidized activated carbon in fuel desulfurization [Volume 9, Issue 7, 2018, Pages 488-493]
Jena, Paramananda
Synthesis of α-MoO3 nanofibers for enhanced field-emission properties [Volume 9, Issue 8, 2018, Pages 585-589]
Jeon, Soo-Yeon
Glucose detection via Ru-mediated catalytic reaction of glucose dehydrogenase [Volume 9, Issue 3, 2018, Pages 220-224]
Jeon, Won-Yong
Glucose detection via Ru-mediated catalytic reaction of glucose dehydrogenase [Volume 9, Issue 3, 2018, Pages 220-224]
J. Headley, Alexander
A review on humidification membrane materials for fuel cells [Volume 9, Issue 4, 2018, Pages 225-233]
Jiang, Zhaoguo
Generalized predictive control for DEAP flexible bionic actuator with fuzzy model [Volume 9, Issue 2, 2018, Pages 132-137]
Ji-hoon, Kang
Impact of infrared radiation on oxide layer of ultrathin TiNi-based alloy wire [Volume 9, Issue 10, 2018, Pages 715-720]
Jin Song, Ying
Synthesis of rGO via UV-assisted photocatalytic reduction of graphene oxide [Volume 9, Issue 6, 2018, Pages 436-438]
Ji-soon, Kim
Impact of infrared radiation on oxide layer of ultrathin TiNi-based alloy wire [Volume 9, Issue 10, 2018, Pages 715-720]
Jiyong, Hu
Effect of electrode material on piezoelectric output of PVDF sensor with electrospun nanofiber web [Volume 9, Issue 5, 2018, Pages 363-368]
J. Myers, John
Behavior of EB FRP masonry bond under service temperature [Volume 9, Issue 11, 2018, Pages 753-759]
J. Myers, John
Structural performance of severely damaged reinforced concrete beams after SRP repair [Volume 9, Issue 11, 2018, Pages 789-795]
Jo, Ho-Jin
Glucose detection via Ru-mediated catalytic reaction of glucose dehydrogenase [Volume 9, Issue 3, 2018, Pages 220-224]
John, Sabu
Inherent species characteristic influence and growth performance assessment for mycelium composite applications [Volume 9, Issue 1, 2018, Pages 71-80]
Jones, Mitchell
Inherent species characteristic influence and growth performance assessment for mycelium composite applications [Volume 9, Issue 1, 2018, Pages 71-80]
J.R Kelly, Susyn
Fibril orientation and strength in collagen materials and adaptation to strain [Volume 9, Issue 6, 2018, Pages 411-418]
J. Sharma, Hemlata
Highly sensitive hydrogen gas sensor based on Al-doped SnO2/Polyaniline composite nanofibers [Volume 9, Issue 3, 2018, Pages 182-187]
Juarez-Islas, Julio
Development of a Co-20Cr alloy for potential biomedical applications [Volume 9, Issue 4, 2018, Pages 291-295]
Juliana Castilho, Cintia
New material architectures through graphene nanosheet assembly [Volume 9, Issue 12, 2018, Pages 843-850]
Junkar, Ita
Visible light responsive TiO2 nanotubes synthesized by electrochemical anodization method [Volume 9, Issue 10, 2018, Pages 708-714]
J. Wróbel, Rafal
Microporous carbon spheres modified with EDA used as carbon dioxide sorbents [Volume 9, Issue 6, 2018, Pages 432-435]
K
Kajikawa, Takashi
Maximum available tensile strength of carbon fibers [Volume 9, Issue 12, 2018, Pages 885-888]
K. Al-Jaberi, Zuhair
Structural performance of severely damaged reinforced concrete beams after SRP repair [Volume 9, Issue 11, 2018, Pages 789-795]
Kamelia Boodhoo, K.V.
Highly hydrophilic copolymer based PES hollow fibre ultrafiltration membranes [Volume 9, Issue 1, 2018, Pages 25-30]
Karachevtseva, Liudmyla
Formation of carbon sp3 hybridization bonds in local electric fields of composites “polymer-CNT” [Volume 9, Issue 4, 2018, Pages 296-300]
Karachevtseva, Liudmyla
Mechanism of destruction of benzoyl peroxide on surface of sp2-type carbon nanomaterials [Volume 9, Issue 6, 2018, Pages 450-455]
Kartel, Mykola
Formation of carbon sp3 hybridization bonds in local electric fields of composites “polymer-CNT” [Volume 9, Issue 4, 2018, Pages 296-300]
Kartel, Mykola
Mechanism of destruction of benzoyl peroxide on surface of sp2-type carbon nanomaterials [Volume 9, Issue 6, 2018, Pages 450-455]
Kasagi, Teruhiro
Percolation-induced low frequency plasmonic state in metal granular composite materials [Volume 9, Issue 7, 2018, Pages 476-480]
Kasuya, Tadashi
Hydrogen concentration behavior of y-grooved weld joint based on a coupled analysis of heat transfer - thermal stress - hydrogen diffusion [Volume 9, Issue 10, 2018, Pages 677-683]
Kaun, Chao-Cheng
Preparation of WS2 Nanosheets from Lithium Intercalation for Hydrogen Evolution [Volume 9, Issue 2, 2018, Pages 128-131]
K. Burghate, Devendra
Polypyrrole/MnO2 nanocomposites as potential electrodes for supercapacitor [Volume 9, Issue 8, 2018, Pages 538-543]
K. Chugunov, Oleg
Structure and properties degradation of the nuclear graphite under neutron irradiation [Volume 9, Issue 11, 2018, Pages 781-788]
K. Das, Amit
Ternary hybrid electrode material based on polyaniline/carbon nanohorn/TiO2 with high performance energy storage capacity [Volume 9, Issue 4, 2018, Pages 234-240]
Kee Lee, Joong
Effects of C60 film coating on the electrochemical performance of composite LiCoO2 cathodes for lithium secondary batteries [Volume 9, Issue 2, 2018, Pages 138-141]
Khalfi, Roumaïssa
Study of the properties of La-doped ZnS thin Films synthesized by Sol-gel method [Volume 9, Issue 3, 2018, Pages 216-219]
Kim, Kwang-Ho
Effect of the substrate bias in diamond deposition during hot filament chemical vapor deposition: Approach by non-classical crystallization [Volume 9, Issue 9, 2018, Pages 638-642]
Kim, Sang-Woo
Recent development of the triboelectric properties of the polymer: A review [Volume 9, Issue 7, 2018, Pages 462-470]
Kiyama, Ayumi
Temperature-sensitive smart polymer with self-controlled glass transition temperature [Volume 9, Issue 12, 2018, Pages 872-875]
K. Karan, Sumanta
Ternary hybrid electrode material based on polyaniline/carbon nanohorn/TiO2 with high performance energy storage capacity [Volume 9, Issue 4, 2018, Pages 234-240]
K. Kaushik, Narender
Synthesis and characterization of stearic acid capped silver nanoparticles: pH dependent stabilization and colorimetric detection of Hg(II) in water [Volume 9, Issue 1, 2018, Pages 53-57]
K. Maiti, T.
Walking robot movement on non-smooth surface controlled by pressure sensor [Volume 9, Issue 2, 2018, Pages 123-127]
Knauth, Philippe
Electrochemical synthesis of conformal, thin and dense ionomer separators for energy storage and conversion devices [Volume 9, Issue 12, 2018, Pages 855-860]
Kolev, Konstantin
Electroless deposition of nickel on biocompatible poly(dimethylsiloxane) after a laser processing as a pretreatment [Volume 9, Issue 2, 2018, Pages 101-106]
Koudoumas, E.
The effect of growth time and oxygen flow on the properties of electrochromic WO3 thin layers grown by LPCVD [Volume 9, Issue 8, 2018, Pages 578-584]
Krasia-Christoforou, Theodora
Nanoparticles-enabled low temperature growth of carbon nanofibers and their properties for supercapacitors [Volume 9, Issue 6, 2018, Pages 444-449]
Kristof, Jaroslav
XPS analysis of the skin treated by microplasma [Volume 9, Issue 4, 2018, Pages 301-305]
K. Saha, Rajat
Synthesis and study of optical properties of microstructure flower-shaped ZnO [Volume 9, Issue 7, 2018, Pages 494-498]
Kukava, Tengiz
Investigation of new antifrictional/frictional nanocomposites based on PTFE matrix filled with Fe-doped carbon nanoparticles [Volume 9, Issue 5, 2018, Pages 320-325]
Kulyk, Tetyana
Mechanism of destruction of benzoyl peroxide on surface of sp2-type carbon nanomaterials [Volume 9, Issue 6, 2018, Pages 450-455]
Kumar, Rahul
Effect of sulfurization temperature on optical and compositional properties of sputtered Zn(O, S) thin films [Volume 9, Issue 11, 2018, Pages 811-815]
Kumar Rajak, Dipen
Evaluation of mild steel hollow and foam filled circular tubes under axial loading [Volume 9, Issue 9, 2018, Pages 660-664]
Kumar Reddy Ithepalli, Sasidhar
Evaluation of use of bottom ash in cement masonry and concrete regarding their mechanical properties [Volume 9, Issue 8, 2018, Pages 553-558]
Kumar S, Praveen
Selective adsorbtion of low density lipoprotein from blood using porous silicon [Volume 9, Issue 2, 2018, Pages 142-147]
Kumar Singh, Ashish
Synthesis of α-MoO3 nanofibers for enhanced field-emission properties [Volume 9, Issue 8, 2018, Pages 585-589]
Kumar Singh, Nirmal
Metal matrix nano composites using graphene nano platelets indented on copper particles in aluminium matrix [Volume 9, Issue 9, 2018, Pages 652-655]
Kumar Singh Patel, Sandeep
Synthesis of α-MoO3 nanofibers for enhanced field-emission properties [Volume 9, Issue 8, 2018, Pages 585-589]
Kumar Srivastav, Simant
Synthesis of α-MoO3 nanofibers for enhanced field-emission properties [Volume 9, Issue 8, 2018, Pages 585-589]
Kumar Vashisth, Balesh
Synthesis and characterization of pure BiFeO3 using various complexing agents by Sol-gel method [Volume 9, Issue 11, 2018, Pages 805-810]
Kumar Verma, Narendra
Synthesis of α-MoO3 nanofibers for enhanced field-emission properties [Volume 9, Issue 8, 2018, Pages 585-589]
Kutelia, E.
Nucleation and growth of carbon nanoforms on the surface of metallic plate-substrates and the mechanism of their doping with the clusters of ferromagnetic atoms [Volume 9, Issue 12, 2018, Pages 867-871]
Kutelia, Elguja
Investigation of new antifrictional/frictional nanocomposites based on PTFE matrix filled with Fe-doped carbon nanoparticles [Volume 9, Issue 5, 2018, Pages 320-325]
Kuts, Volodymyr
Mechanism of destruction of benzoyl peroxide on surface of sp2-type carbon nanomaterials [Volume 9, Issue 6, 2018, Pages 450-455]
K. Yadav, A.
Effect of sulfurization temperature on optical and compositional properties of sputtered Zn(O, S) thin films [Volume 9, Issue 11, 2018, Pages 811-815]
L
Lakshmi, G.B.V.S.
Swift heavy ion induced modifications in the structural, optical and methane sensing properties of indium oxide thin films - A comparative study using Ag9+ and O7+ ion irradiation [Volume 9, Issue 7, 2018, Pages 481-487]
Lampe, Tomaž
Visible light responsive TiO2 nanotubes synthesized by electrochemical anodization method [Volume 9, Issue 10, 2018, Pages 708-714]
Landage, Deepa
Templated synthesis of mesoscopic titania and its application in the solid-state dye-sensitized solar cells [Volume 9, Issue 2, 2018, Pages 148-152]
Larring, Yngve
Synthesis and modelling of nanoparticles for chemical looping reforming [Volume 9, Issue 6, 2018, Pages 439-443]
Larsen, Kristian
Towards airflow sensors with energy harvesting and wireless transmitting properties [Volume 9, Issue 5, 2018, Pages 311-319]
L. do A. Montanheiro, Thaís
Effect of graphite nanosheets on electrical, electromagnetic, mechanical and morphological characteristics of PHBV/GNS nanocomposites [Volume 9, Issue 7, 2018, Pages 499-504]
L. Edmonds, Richard
Fibril orientation and strength in collagen materials and adaptation to strain [Volume 9, Issue 6, 2018, Pages 411-418]
Lee, Bo-Hee
Glucose detection via Ru-mediated catalytic reaction of glucose dehydrogenase [Volume 9, Issue 3, 2018, Pages 220-224]
Lee;Hyug-Han Kim, Chang-Jun
Glucose detection via Ru-mediated catalytic reaction of glucose dehydrogenase [Volume 9, Issue 3, 2018, Pages 220-224]
Leniec, Grzegorz
Composites of AISI 316L stainless steel and nanocrystalline Ti-B-C ceramic powders [Volume 9, Issue 10, 2018, Pages 696-702]
Li, Baojun
Fibre-optic trapping and manipulation at the nanoscale [Volume 9, Issue 8, 2018, Pages 567-577]
Li, Ching-Wen
Template-assisted fabrication of tunable aspect ratio, biocompatible iron oxide pillar arrays [Volume 9, Issue 4, 2018, Pages 249-257]
Li, Jihong
Effect of Al on the columnar-to-equiaxed transition for Ti-6%Al and Ti-45%Al by cellular automaton [Volume 9, Issue 12, 2018, Pages 889-894]
Li, Junjie
Reducing edge effect of temperature-field for large area thin film deposition in hot filament chemical vapor deposition system [Volume 9, Issue 10, 2018, Pages 727-732]
Li, Liang
Hydrogenated TiO2 as efficient electron transport layer of planar perovskite solar cell [Volume 9, Issue 6, 2018, Pages 419-425]
Li, Lin
Reducing edge effect of temperature-field for large area thin film deposition in hot filament chemical vapor deposition system [Volume 9, Issue 10, 2018, Pages 727-732]
Li, Meng
Phosphorus/reduced graphene oxide nanocomposite for high-performance anode of sodium-ion batteries [Volume 9, Issue 5, 2018, Pages 331-335]
Li, Wei
A review on humidification membrane materials for fuel cells [Volume 9, Issue 4, 2018, Pages 225-233]
Li, Yan-Ru
Synthesis of rGO via UV-assisted photocatalytic reduction of graphene oxide [Volume 9, Issue 6, 2018, Pages 436-438]
Li, Yuan
Generalized predictive control for DEAP flexible bionic actuator with fuzzy model [Volume 9, Issue 2, 2018, Pages 132-137]
Li, Yuchao
Fibre-optic trapping and manipulation at the nanoscale [Volume 9, Issue 8, 2018, Pages 567-577]
Li, Yuliya
On the deformation behavior of bi-metal via digital image correlation [Volume 9, Issue 1, 2018, Pages 20-24]
Lin, Kuan-Bo
Preparation of WS2 Nanosheets from Lithium Intercalation for Hydrogen Evolution [Volume 9, Issue 2, 2018, Pages 128-131]
Liu, Jianwen
ZnSn(OH)6 nanocubes as a high-performance anode for lithium-ion batteries [Volume 9, Issue 12, 2018, Pages 880-884]
Liu, Lu
The influence of the edge characteristics of detected objects on underwater active electrolocation system [Volume 9, Issue 1, 2018, Pages 81-85]
Liu, Muchun
New material architectures through graphene nanosheet assembly [Volume 9, Issue 12, 2018, Pages 843-850]
Liu, Rui
Synthesis of rGO via UV-assisted photocatalytic reduction of graphene oxide [Volume 9, Issue 6, 2018, Pages 436-438]
Liu, Runze
Facile synthesis of graphene quantum dots based on electrochemical method and their application for specific Fe3+ detection [Volume 9, Issue 9, 2018, Pages 614-618]
Liu, Wei
ZnSn(OH)6 nanocubes as a high-performance anode for lithium-ion batteries [Volume 9, Issue 12, 2018, Pages 880-884]
Liu, Xiaoshuai
Fibre-optic trapping and manipulation at the nanoscale [Volume 9, Issue 8, 2018, Pages 567-577]
Liu, Xiaoxuan
Properties of the photochromic latexes based on spiropyran by emulsion polymerization [Volume 9, Issue 2, 2018, Pages 97-100]
Lopez F, Hugo
Development of a Co-20Cr alloy for potential biomedical applications [Volume 9, Issue 4, 2018, Pages 291-295]
Louloudakis, D.
Effect of deposition temperature on the electrochromic properties of WO3 grown by LPCVD [Volume 9, Issue 3, 2018, Pages 192-198]
Louloudakis, D.
The effect of growth time and oxygen flow on the properties of electrochromic WO3 thin layers grown by LPCVD [Volume 9, Issue 8, 2018, Pages 578-584]
Lu, Hao
Hydrogenated TiO2 as efficient electron transport layer of planar perovskite solar cell [Volume 9, Issue 6, 2018, Pages 419-425]
Luisa Di Vona, Maria
Electrochemical synthesis of conformal, thin and dense ionomer separators for energy storage and conversion devices [Volume 9, Issue 12, 2018, Pages 855-860]
Lynggaard, Per
Towards airflow sensors with energy harvesting and wireless transmitting properties [Volume 9, Issue 5, 2018, Pages 311-319]
Lytvynenko, Oleg
Formation of carbon sp3 hybridization bonds in local electric fields of composites “polymer-CNT” [Volume 9, Issue 4, 2018, Pages 296-300]
M
Ma, Yulong
Hydrogenated TiO2 as efficient electron transport layer of planar perovskite solar cell [Volume 9, Issue 6, 2018, Pages 419-425]
Maiti, Sandip
Ternary hybrid electrode material based on polyaniline/carbon nanohorn/TiO2 with high performance energy storage capacity [Volume 9, Issue 4, 2018, Pages 234-240]
Mallick, Dibyaranjan
Effect of Mg content in Ag/Zn1-XMgXO/Cu structure for bipolar resistive switching performances [Volume 9, Issue 3, 2018, Pages 153-157]
Manjula, N.
Magnetic and dielectric properties of divalent Ca2+ and Ba2+ ions co-doped BiFeO3 nanoparticles [Volume 9, Issue 3, 2018, Pages 175-181]
Marmur, Abraham
There is plenty of room at the bottom: New Insights into old observations [Volume 9, Issue 9, 2018, Pages 610-613]
Massango, Herieta
Percolation-induced low frequency plasmonic state in metal granular composite materials [Volume 9, Issue 7, 2018, Pages 476-480]
M. Bahirwar, Bhaskar
Highly sensitive hydrogen gas sensor based on Al-doped SnO2/Polyaniline composite nanofibers [Volume 9, Issue 3, 2018, Pages 182-187]
M. Basil-Jones, Melissa
Fibril orientation and strength in collagen materials and adaptation to strain [Volume 9, Issue 6, 2018, Pages 411-418]
M. Brasil, Lourdes
Assembly and characterization of ZnO nanoparticles for Grätzel's solar cells [Volume 9, Issue 4, 2018, Pages 284-290]
Merzouk, Hamid
Study of the properties of La-doped ZnS thin Films synthesized by Sol-gel method [Volume 9, Issue 3, 2018, Pages 216-219]
M. Escobar, Diana
Mechanical properties of hydroxyapatite scaffolds produced by gel-casting and combination gel-casting/polymer foams infiltration [Volume 9, Issue 4, 2018, Pages 266-274]
M. Gambaryan, Karen
Narrow bandgap quantum dot diode structures and photoresistors for thermo-photovoltaic and infrared applications [Volume 9, Issue 2, 2018, Pages 112-115]
Michalkiewicz, Beata
Microporous carbon spheres modified with EDA used as carbon dioxide sorbents [Volume 9, Issue 6, 2018, Pages 432-435]
Minamoto, Satoshi
Hydrogen concentration behavior of y-grooved weld joint based on a coupled analysis of heat transfer - thermal stress - hydrogen diffusion [Volume 9, Issue 10, 2018, Pages 677-683]
Miura-Mattausch;H. J. Mattausch, M.
Walking robot movement on non-smooth surface controlled by pressure sensor [Volume 9, Issue 2, 2018, Pages 123-127]
Miyamoto, Hideto
XPS analysis of the skin treated by microplasma [Volume 9, Issue 4, 2018, Pages 301-305]
M. Kaczmarek, Slawomir
Composites of AISI 316L stainless steel and nanocrystalline Ti-B-C ceramic powders [Volume 9, Issue 10, 2018, Pages 696-702]
M. Mahadevan, K.
Naphthol bis-indole derivative as an anode material for aqueous rechargeable lithium ion battery [Volume 9, Issue 8, 2018, Pages 594-601]
Mohamed Amer Mohamed, Adel
Structural and mechanical properties of CeO2 reinforced Al matrix nanocomposites [Volume 9, Issue 8, 2018, Pages 602-605]
Mohammed, Himyan
Structural and mechanical properties of CeO2 reinforced Al matrix nanocomposites [Volume 9, Issue 8, 2018, Pages 602-605]
Mohammed Zaeem, Shaikh
Graphene-metal oxide nanocomposites for supercapacitors: A perspective review [Volume 9, Issue 1, 2018, Pages 2-19]
M. Pinilla Torres, Ana
Effect of the BMIM BF4 immobilization on oxidized activated carbon in fuel desulfurization [Volume 9, Issue 7, 2018, Pages 488-493]
M. Ragab;Nazik A. Elgindy, Doaa
Recent advances in nanofibers fabrication and their potential applications in wound healing and regenerative medicine [Volume 9, Issue 10, 2018, Pages 665-676]
M. Saleem, Amin
Nanoparticles-enabled low temperature growth of carbon nanofibers and their properties for supercapacitors [Volume 9, Issue 6, 2018, Pages 444-449]
M. Sanchez, Laura
Thermal properties of hydrogel-clay nano-composites [Volume 9, Issue 7, 2018, Pages 505-509]
M. Santhini, V.
Carvedilol drug-organo montmorillonite nanocomposites: Preparation, characterization and drug release studies [Volume 9, Issue 4, 2018, Pages 258-265]
M. Siddiqui, Azher
Swift heavy ion induced modifications in the structural, optical and methane sensing properties of indium oxide thin films - A comparative study using Ag9+ and O7+ ion irradiation [Volume 9, Issue 7, 2018, Pages 481-487]
Müller, Jens
Multilayer ceramics as integration platform for sensors in in-vitro cell culture reactors [Volume 9, Issue 11, 2018, Pages 748-752]
N
N., Jadhav
Efficient siRNA delivery using osmotically active and biodegradable poly(ester amine) [Volume 9, Issue 8, 2018, Pages 590-593]
Nachtane, Mourad
Staking lay-up effect on dynamic compression behaviour of e-glass/epoxy composite materials: experimental and numerical investigation [Volume 9, Issue 11, 2018, Pages 816-822]
Nakhaeipour, A.
A sensitive electrochemical aptasensor based on single wall carbon nanotube modified screen printed electrode for detection of Escherichia coli O157:H7 [Volume 9, Issue 5, 2018, Pages 369-374]
Narkiewicz, Urszula
Microporous carbon spheres modified with EDA used as carbon dioxide sorbents [Volume 9, Issue 6, 2018, Pages 432-435]
Navarro, D.
Walking robot movement on non-smooth surface controlled by pressure sensor [Volume 9, Issue 2, 2018, Pages 123-127]
Nee Tan, Yen
Microwave-assisted synthesis and mechanistic study of multicolor emissive Au nanoclusters using thiol-containing biomolecules [Volume 9, Issue 9, 2018, Pages 647-651]
N. Ludue, Leandro
Polycaprolactone/organoclay biodegradable nanocomposites: dissimilar tendencies of different clay modifiers [Volume 9, Issue 11, 2018, Pages 796-804]
Nosrati M. Mashreghi, M.
A sensitive electrochemical aptasensor based on single wall carbon nanotube modified screen printed electrode for detection of Escherichia coli O157:H7 [Volume 9, Issue 5, 2018, Pages 369-374]
N. Singh, V.
Effect of sulfurization temperature on optical and compositional properties of sputtered Zn(O, S) thin films [Volume 9, Issue 11, 2018, Pages 811-815]
Nursultanov, Nurzhan
Joule heating of logs for phytosanitary purposes and timber processing pre-treatment [Volume 9, Issue 11, 2018, Pages 767-775]
O
Ochi, Y.
Walking robot movement on non-smooth surface controlled by pressure sensor [Volume 9, Issue 2, 2018, Pages 123-127]
Ohmi, Toshihito
Hydrogen concentration behavior of y-grooved weld joint based on a coupled analysis of heat transfer - thermal stress - hydrogen diffusion [Volume 9, Issue 10, 2018, Pages 677-683]
Onyshchenko, Volodymyr
Formation of carbon sp3 hybridization bonds in local electric fields of composites “polymer-CNT” [Volume 9, Issue 4, 2018, Pages 296-300]
Ozana, Nisan
Remote photonic sensing of glucose concentration via analysis of time varied speckle patterns [Volume 9, Issue 9, 2018, Pages 624-628]
Ozeki, Go
Hydrogen concentration behavior of y-grooved weld joint based on a coupled analysis of heat transfer - thermal stress - hydrogen diffusion [Volume 9, Issue 10, 2018, Pages 677-683]
P
Padhi, Payodhar
Experimental investigation on the bending response of multilayered Ag-ionic polymer-metal composite actuator for robotic application [Volume 9, Issue 8, 2018, Pages 544-548]
Palyanytsya, Borys
Mechanism of destruction of benzoyl peroxide on surface of sp2-type carbon nanomaterials [Volume 9, Issue 6, 2018, Pages 450-455]
Pan, Ruhao
Reducing edge effect of temperature-field for large area thin film deposition in hot filament chemical vapor deposition system [Volume 9, Issue 10, 2018, Pages 727-732]
Pandey, Rachit
Electromagnetic shielding capability of magnesium based materials: A review [Volume 9, Issue 5, 2018, Pages 387-391]
Pandit, Yashwant
Templated synthesis of mesoscopic titania and its application in the solid-state dye-sensitized solar cells [Volume 9, Issue 2, 2018, Pages 148-152]
Papadimitropoulos, G.
Effect of deposition temperature on the electrochromic properties of WO3 grown by LPCVD [Volume 9, Issue 3, 2018, Pages 192-198]
Papadimitropoulos, G.
The effect of growth time and oxygen flow on the properties of electrochromic WO3 thin layers grown by LPCVD [Volume 9, Issue 8, 2018, Pages 578-584]
Park, Jin-Woo
Effect of the substrate bias in diamond deposition during hot filament chemical vapor deposition: Approach by non-classical crystallization [Volume 9, Issue 9, 2018, Pages 638-642]
Paula Lemes, Ana
Effect of graphite nanosheets on electrical, electromagnetic, mechanical and morphological characteristics of PHBV/GNS nanocomposites [Volume 9, Issue 7, 2018, Pages 499-504]
Paula S. Oliveira, Ana
Effect of graphite nanosheets on electrical, electromagnetic, mechanical and morphological characteristics of PHBV/GNS nanocomposites [Volume 9, Issue 7, 2018, Pages 499-504]
Pedraza-Chávez, J.
Waveguide-detector system on silicon for sensor application [Volume 9, Issue 2, 2018, Pages 116-122]
Penchal Reddy, Matli
Structural and mechanical properties of CeO2 reinforced Al matrix nanocomposites [Volume 9, Issue 8, 2018, Pages 602-605]
Peng, Jiegang
The influence of the edge characteristics of detected objects on underwater active electrolocation system [Volume 9, Issue 1, 2018, Pages 81-85]
Peña-Cabrera, Eduardo
Conjugate-like addition of soft nucleophiles to 8-alkenylBODIPYs [Volume 9, Issue 6, 2018, Pages 426-431]
Pereira, Adejanildo
Palm oil fatty acids and carotenoids extraction with lipase immobilized in magnetic nanoparticles [Volume 9, Issue 9, 2018, Pages 643-646]
P. Espinosa-Ramirez, Ana
Optical and electrical properties of graphene oxide and reduced graphene oxide films deposited onto glass and Ecoflex® substrates towards organic solar cells [Volume 9, Issue 1, 2018, Pages 58-65]
P. Gairola, S.
Synthesis and characterization of pure BiFeO3 using various complexing agents by Sol-gel method [Volume 9, Issue 11, 2018, Pages 805-810]
Phulkerd, Panitha
Temperature-sensitive smart polymer with self-controlled glass transition temperature [Volume 9, Issue 12, 2018, Pages 872-875]
P. Ingole, Pravin
Rod-shaped copper (Cu, Cu2O) nano catalyst for the facile oxidation of methanol [Volume 9, Issue 1, 2018, Pages 36-41]
P.Mahajan, Ashish
Polypyrrole/MnO2 nanocomposites as potential electrodes for supercapacitor [Volume 9, Issue 8, 2018, Pages 538-543]
P. Mahore, Ritu
Polypyrrole/MnO2 nanocomposites as potential electrodes for supercapacitor [Volume 9, Issue 8, 2018, Pages 538-543]
Polani, Sagi
Remote photonic sensing of glucose concentration via analysis of time varied speckle patterns [Volume 9, Issue 9, 2018, Pages 624-628]
P. Ollier, Romina
Polycaprolactone/organoclay biodegradable nanocomposites: dissimilar tendencies of different clay modifiers [Volume 9, Issue 11, 2018, Pages 796-804]
P. Ollier*, Romina
Thermal properties of hydrogel-clay nano-composites [Volume 9, Issue 7, 2018, Pages 505-509]
Pordeli, P.
A sensitive electrochemical aptasensor based on single wall carbon nanotube modified screen printed electrode for detection of Escherichia coli O157:H7 [Volume 9, Issue 5, 2018, Pages 369-374]
P. Ossa, Claudia
Mechanical properties of hydroxyapatite scaffolds produced by gel-casting and combination gel-casting/polymer foams infiltration [Volume 9, Issue 4, 2018, Pages 266-274]
Pozmogova, Galina
G4 self-assembly as an intrinsic nucleic acid function [Volume 9, Issue 2, 2018, Pages 91-96]
Prakash;Davinder Kaur, Ravi
Effect of Mg content in Ag/Zn1-XMgXO/Cu structure for bipolar resistive switching performances [Volume 9, Issue 3, 2018, Pages 153-157]
Prakash Jaiswal, Anand
Metal matrix nano composites using graphene nano platelets indented on copper particles in aluminium matrix [Volume 9, Issue 9, 2018, Pages 652-655]
Przybyl, Wojciech
Optical and electrical properties of graphene oxide and reduced graphene oxide films deposited onto glass and Ecoflex® substrates towards organic solar cells [Volume 9, Issue 1, 2018, Pages 58-65]
Pu, Xiong
Phosphorus/reduced graphene oxide nanocomposite for high-performance anode of sodium-ion batteries [Volume 9, Issue 5, 2018, Pages 331-335]
P. Vijayalakshmi, R.
Magnetic and dielectric properties of divalent Ca2+ and Ba2+ ions co-doped BiFeO3 nanoparticles [Volume 9, Issue 3, 2018, Pages 175-181]
R
R, Ramesh
Selective adsorbtion of low density lipoprotein from blood using porous silicon [Volume 9, Issue 2, 2018, Pages 142-147]
Raja Kandula, Kumara
Improved electrical and photoluminescence properties in Nd substitution of 0.94(Na0.5Bi0.5TiO3)-0.06BaTiO3 lead free multi-functional ceramics [Volume 9, Issue 9, 2018, Pages 656-659]
R. Aljazaeri, Zena
Structural performance of severely damaged reinforced concrete beams after SRP repair [Volume 9, Issue 11, 2018, Pages 789-795]
Ramiasa-MacGregor, Melanie
Nanoengineered plasma polymer films for biomedical applications [Volume 9, Issue 1, 2018, Pages 42-52]
Ramirez-Ledesma, Ana
Development of a Co-20Cr alloy for potential biomedical applications [Volume 9, Issue 4, 2018, Pages 291-295]
Ramu, S.
Magnetic and dielectric properties of divalent Ca2+ and Ba2+ ions co-doped BiFeO3 nanoparticles [Volume 9, Issue 3, 2018, Pages 175-181]
Rani, Nutan
Rod-shaped copper (Cu, Cu2O) nano catalyst for the facile oxidation of methanol [Volume 9, Issue 1, 2018, Pages 36-41]
Ranjan, Rachit
Metal matrix nano composites using graphene nano platelets indented on copper particles in aluminium matrix [Volume 9, Issue 9, 2018, Pages 652-655]
R. Baldan, Maurício
Effect of graphite nanosheets on electrical, electromagnetic, mechanical and morphological characteristics of PHBV/GNS nanocomposites [Volume 9, Issue 7, 2018, Pages 499-504]
R. Fischer, H.
Reversible cross-linking in composite binders - in-situ repair options and recyclability [Volume 9, Issue 12, 2018, Pages 861-866]
Ribeiro, Josimar
PtSn/C electrocatalysts modified with Ni and Ga for the ethanol electrooxidation [Volume 9, Issue 12, 2018, Pages 895-901]
R. Kayed, Hanan
Fibril orientation and strength in collagen materials and adaptation to strain [Volume 9, Issue 6, 2018, Pages 411-418]
R. Lanfranconi, Matias
Polycaprolactone/organoclay biodegradable nanocomposites: dissimilar tendencies of different clay modifiers [Volume 9, Issue 11, 2018, Pages 796-804]
R. Lanfranconi, Matias
Non-isothermal crystallization of PCL/CLAY nanocomposites [Volume 9, Issue 8, 2018, Pages 559-566]
Robbennolt, Shauna
Fabrication and magnetic properties of Sol-Gel derived NiZn ferrite thin films for microwave applications [Volume 9, Issue 5, 2018, Pages 345-352]
Rouhbakhsh Zaeri, Z.
A sensitive electrochemical aptasensor based on single wall carbon nanotube modified screen printed electrode for detection of Escherichia coli O157:H7 [Volume 9, Issue 5, 2018, Pages 369-374]
R. Passador, Fábio
Effect of graphite nanosheets on electrical, electromagnetic, mechanical and morphological characteristics of PHBV/GNS nanocomposites [Volume 9, Issue 7, 2018, Pages 499-504]
R. Tolchard, Julian
Synthesis and modelling of nanoparticles for chemical looping reforming [Volume 9, Issue 6, 2018, Pages 439-443]
Ruiz-Rivas, Joaquin
Remote photonic sensing of glucose concentration via analysis of time varied speckle patterns [Volume 9, Issue 9, 2018, Pages 624-628]
Rukhadze, L.
Nucleation and growth of carbon nanoforms on the surface of metallic plate-substrates and the mechanism of their doping with the clusters of ferromagnetic atoms [Volume 9, Issue 12, 2018, Pages 867-871]
Rukhadze, Leri
Investigation of new antifrictional/frictional nanocomposites based on PTFE matrix filled with Fe-doped carbon nanoparticles [Volume 9, Issue 5, 2018, Pages 320-325]
Ryu, Hanjun
Recent development of the triboelectric properties of the polymer: A review [Volume 9, Issue 7, 2018, Pages 462-470]
S
Saikia;Mrinal K. Debanath, Eeshankur
Synthesis and study of optical properties of microstructure flower-shaped ZnO [Volume 9, Issue 7, 2018, Pages 494-498]
Saini, Kalawati
Rod-shaped copper (Cu, Cu2O) nano catalyst for the facile oxidation of methanol [Volume 9, Issue 1, 2018, Pages 36-41]
Sangshetti, Jaiprakash
Efficient siRNA delivery using osmotically active and biodegradable poly(ester amine) [Volume 9, Issue 8, 2018, Pages 590-593]
Santosh Kumar Raavi, Sai
Improved electrical and photoluminescence properties in Nd substitution of 0.94(Na0.5Bi0.5TiO3)-0.06BaTiO3 lead free multi-functional ceramics [Volume 9, Issue 9, 2018, Pages 656-659]
Sardini, Emilio
Design of FES based muscle stimulator device using EMG and insole force resistive sensors for foot drop patients [Volume 9, Issue 11, 2018, Pages 776-780]
Savtchouk, Alexandre
Work function and induced band bending characterization for engineering of selective contact for solar cells [Volume 9, Issue 9, 2018, Pages 629-631]
Savva, Ioanna
Nanoparticles-enabled low temperature growth of carbon nanofibers and their properties for supercapacitors [Volume 9, Issue 6, 2018, Pages 444-449]
S. Bangruwa, Jarnail
Synthesis and characterization of pure BiFeO3 using various complexing agents by Sol-gel method [Volume 9, Issue 11, 2018, Pages 805-810]
S. Bocharov, Gregory
Surface reinforcement of metals by carbon nanomaterials followed by high intense energy irradiation [Volume 9, Issue 10, 2018, Pages 733-736]
Sch, Donat
Biocomposites based on plant material [Volume 9, Issue 12, 2018, Pages 876-879]
Scheffler, Michael
Particle-filled polymer derived ceramic coatings on titanium alloy Ti-6Al-4V [Volume 9, Issue 1, 2018, Pages 66-70]
Scherbakov, Vladimir
Biocompatible features of magnetic nano-oxide core/ PCL shell 3D composites fabricated via SLS/M process [Volume 9, Issue 1, 2018, Pages 31-35]
Schober Hartmut Witte, Andreas
Multilayer ceramics as integration platform for sensors in in-vitro cell culture reactors [Volume 9, Issue 11, 2018, Pages 748-752]
Schwartz, Ariel
Remote photonic sensing of glucose concentration via analysis of time varied speckle patterns [Volume 9, Issue 9, 2018, Pages 624-628]
Schwarz, Ariel
Sensitivity enhanced photo-thermal borders detection in bio-phantoms enriched with gold nanoparticles [Volume 9, Issue 7, 2018, Pages 471-475]
Sementsov, Yurii
Formation of carbon sp3 hybridization bonds in local electric fields of composites “polymer-CNT” [Volume 9, Issue 4, 2018, Pages 296-300]
Seok Kang, Hong
Stacking patterns and carrier mobilities of GeS bilayer [Volume 9, Issue 3, 2018, Pages 205-210]
Sepúlveda, Nelson
Programming emissivity on fully integrated VO2 windows [Volume 9, Issue 6, 2018, Pages 406-410]
Serafin, Jaroslaw
Microporous carbon spheres modified with EDA used as carbon dioxide sorbents [Volume 9, Issue 6, 2018, Pages 432-435]
Sergey, Gunther
Impact of infrared radiation on oxide layer of ultrathin TiNi-based alloy wire [Volume 9, Issue 10, 2018, Pages 715-720]
Serpelloni, Mauro
Design of FES based muscle stimulator device using EMG and insole force resistive sensors for foot drop patients [Volume 9, Issue 11, 2018, Pages 776-780]
Sethi, Riti
Swift heavy ion induced modifications in the structural, optical and methane sensing properties of indium oxide thin films - A comparative study using Ag9+ and O7+ ion irradiation [Volume 9, Issue 7, 2018, Pages 481-487]
Severov, Vyacheslav
G4 self-assembly as an intrinsic nucleic acid function [Volume 9, Issue 2, 2018, Pages 91-96]
S. Frolov, Alexey
Structure and properties degradation of the nuclear graphite under neutron irradiation [Volume 9, Issue 11, 2018, Pages 781-788]
S. Gajbhiye, N.
Synthesis of α-MoO3 nanofibers for enhanced field-emission properties [Volume 9, Issue 8, 2018, Pages 585-589]
S. Gour, K.
Effect of sulfurization temperature on optical and compositional properties of sputtered Zn(O, S) thin films [Volume 9, Issue 11, 2018, Pages 811-815]
Shakoor, Abdul
Structural and mechanical properties of CeO2 reinforced Al matrix nanocomposites [Volume 9, Issue 8, 2018, Pages 602-605]
Sharma Bhatia, Smriti
Rod-shaped copper (Cu, Cu2O) nano catalyst for the facile oxidation of methanol [Volume 9, Issue 1, 2018, Pages 36-41]
Sheikhzadeh, E.
A sensitive electrochemical aptasensor based on single wall carbon nanotube modified screen printed electrode for detection of Escherichia coli O157:H7 [Volume 9, Issue 5, 2018, Pages 369-374]
Shemer, Amir
Remote photonic sensing of glucose concentration via analysis of time varied speckle patterns [Volume 9, Issue 9, 2018, Pages 624-628]
Shibayama, Yoshiyuki
Magnetism of ACFs and superfluidity of 4He adsorbed in ACFs [Volume 9, Issue 11, 2018, Pages 760-766]
Shimizu, Kazuo
XPS analysis of the skin treated by microplasma [Volume 9, Issue 4, 2018, Pages 301-305]
Shioya, Masatoshi
Maximum available tensile strength of carbon fibers [Volume 9, Issue 12, 2018, Pages 885-888]
Shishkovsky, Igor
Biocompatible features of magnetic nano-oxide core/ PCL shell 3D composites fabricated via SLS/M process [Volume 9, Issue 1, 2018, Pages 31-35]
Shojaei, Fazel
Stacking patterns and carrier mobilities of GeS bilayer [Volume 9, Issue 3, 2018, Pages 205-210]
S. Hui, Wang.
Assembly and characterization of ZnO nanoparticles for Grätzel's solar cells [Volume 9, Issue 4, 2018, Pages 284-290]
Sibera, Daniel
Microporous carbon spheres modified with EDA used as carbon dioxide sorbents [Volume 9, Issue 6, 2018, Pages 432-435]
Sicakova, Alena
Effect of selected cellulosic fibers on the properties of cement based composites [Volume 9, Issue 8, 2018, Pages 606-609]
Singh, Gurdev
Highly hydrophilic copolymer based PES hollow fibre ultrafiltration membranes [Volume 9, Issue 1, 2018, Pages 25-30]
Singh, Kirandeep
Effect of Mg content in Ag/Zn1-XMgXO/Cu structure for bipolar resistive switching performances [Volume 9, Issue 3, 2018, Pages 153-157]
Singh, Ragini
Redox-active cerium oxide based nanozyme abrogate the organophosphate mediated poisoning in mammalian cells [Volume 9, Issue 10, 2018, Pages 737-747]
Singh, Sanjay
Redox-active cerium oxide based nanozyme abrogate the organophosphate mediated poisoning in mammalian cells [Volume 9, Issue 10, 2018, Pages 737-747]
Singh;Sanjay Singh, Ragini
Uptake and toxicity of different nanoparticles towards a tough bacterium: Deinococcus radiodurans [Volume 9, Issue 7, 2018, Pages 531-537]
Sinvani, Moshe
Sensitivity enhanced photo-thermal borders detection in bio-phantoms enriched with gold nanoparticles [Volume 9, Issue 7, 2018, Pages 471-475]
S Jayan, Ponnarassery
Isothermal aging characteristics of rare earth magnesium hexaaluminate based advanced thermal barrier coatings [Volume 9, Issue 5, 2018, Pages 375-382]
Smart, Thomas
Joule heating of logs for phytosanitary purposes and timber processing pre-treatment [Volume 9, Issue 11, 2018, Pages 767-775]
S. Montagna, Larissa
Effect of graphite nanosheets on electrical, electromagnetic, mechanical and morphological characteristics of PHBV/GNS nanocomposites [Volume 9, Issue 7, 2018, Pages 499-504]
Sofia Cortes, Ana
Synthesis of fluorescent water-soluble oligo (oxazoline-ethylenimine) block copolymers [Volume 9, Issue 5, 2018, Pages 383-386]
Solimani, S.
A sensitive electrochemical aptasensor based on single wall carbon nanotube modified screen printed electrode for detection of Escherichia coli O157:H7 [Volume 9, Issue 5, 2018, Pages 369-374]
Soots, Regina
Stability of graphene suspensions in an aqueous based multi-component medium [Volume 9, Issue 3, 2018, Pages 211-215]
S. Rajbhoj, Anjali
Synthesis, characterizations, and comparative study of electro-optical properties of indole-based squaraine sensitizers as efficiency to enhancing dye-sensitized solar cells [Volume 9, Issue 4, 2018, Pages 275-283]
S. Rajbhoj, Anjali
Symmetrical and unsymmetrical squaraine sensitizers for dye-sensitized solar cells: present day advances and future challenges [Volume 9, Issue 5, 2018, Pages 353-362]
Srenscek-Nazzal, Joanna
Microporous carbon spheres modified with EDA used as carbon dioxide sorbents [Volume 9, Issue 6, 2018, Pages 432-435]
S. Sasaki, Stephen
Fabrication and magnetic properties of Sol-Gel derived NiZn ferrite thin films for microwave applications [Volume 9, Issue 5, 2018, Pages 345-352]
S.Suresh, G.
Naphthol bis-indole derivative as an anode material for aqueous rechargeable lithium ion battery [Volume 9, Issue 8, 2018, Pages 594-601]
Stankova, Nadya
Electroless deposition of nickel on biocompatible poly(dimethylsiloxane) after a laser processing as a pretreatment [Volume 9, Issue 2, 2018, Pages 101-106]
S. Tawale, J.
Effect of sulfurization temperature on optical and compositional properties of sputtered Zn(O, S) thin films [Volume 9, Issue 11, 2018, Pages 811-815]
Stevulova, Nadezda
Effect of selected cellulosic fibers on the properties of cement based composites [Volume 9, Issue 8, 2018, Pages 606-609]
Stipetic, Marina
Development of advanced aerogel-based composite material with high performance for building industry [Volume 9, Issue 9, 2018, Pages 632-637]
Stojcheva, Elizabeta
Visible light responsive TiO2 nanotubes synthesized by electrochemical anodization method [Volume 9, Issue 10, 2018, Pages 708-714]
Su, Yen-Hsun
Preparation of WS2 Nanosheets from Lithium Intercalation for Hydrogen Evolution [Volume 9, Issue 2, 2018, Pages 128-131]
Sugimoto, Yoshiki
Maximum available tensile strength of carbon fibers [Volume 9, Issue 12, 2018, Pages 885-888]
Sugunalakshmi, M.
Carvedilol drug-organo montmorillonite nanocomposites: Preparation, characterization and drug release studies [Volume 9, Issue 4, 2018, Pages 258-265]
Sun, Chi
Reducing edge effect of temperature-field for large area thin film deposition in hot filament chemical vapor deposition system [Volume 9, Issue 10, 2018, Pages 727-732]
Sun, Wei
ZnSn(OH)6 nanocubes as a high-performance anode for lithium-ion batteries [Volume 9, Issue 12, 2018, Pages 880-884]
Sunil Kumar, K.
Magnetic and dielectric properties of divalent Ca2+ and Ba2+ ions co-doped BiFeO3 nanoparticles [Volume 9, Issue 3, 2018, Pages 175-181]
Svenum, Ingeborg-Helene
Synthesis and modelling of nanoparticles for chemical looping reforming [Volume 9, Issue 6, 2018, Pages 439-443]
T
T, Aravind
Selective adsorbtion of low density lipoprotein from blood using porous silicon [Volume 9, Issue 2, 2018, Pages 142-147]
Takahashi, Kuniaki
Maximum available tensile strength of carbon fibers [Volume 9, Issue 12, 2018, Pages 885-888]
Talantikite-Touati, Djahida
Study of the properties of La-doped ZnS thin Films synthesized by Sol-gel method [Volume 9, Issue 3, 2018, Pages 216-219]
Talman, Roy
Remote photonic sensing of glucose concentration via analysis of time varied speckle patterns [Volume 9, Issue 9, 2018, Pages 624-628]
Tarfaoui, Mostapha
Staking lay-up effect on dynamic compression behaviour of e-glass/epoxy composite materials: experimental and numerical investigation [Volume 9, Issue 11, 2018, Pages 816-822]
Tatchev, Dragomir
Electroless deposition of nickel on biocompatible poly(dimethylsiloxane) after a laser processing as a pretreatment [Volume 9, Issue 2, 2018, Pages 101-106]
T. Harini, G.
Templated synthesis of mesoscopic titania and its application in the solid-state dye-sensitized solar cells [Volume 9, Issue 2, 2018, Pages 148-152]
Tian, Haining
Preparation of polymer nano-photocatalysts by using triton X-100 to improve performance of photocatalytic hydrogen generation [Volume 9, Issue 5, 2018, Pages 326-330]
Tian, Shibing
Reducing edge effect of temperature-field for large area thin film deposition in hot filament chemical vapor deposition system [Volume 9, Issue 10, 2018, Pages 727-732]
Timofey, Chekalkin
Impact of infrared radiation on oxide layer of ultrathin TiNi-based alloy wire [Volume 9, Issue 10, 2018, Pages 715-720]
Tiwari, Ashutosh
European Advanced Materials Congress (EAMC) [Volume 9, Issue 1, 2018, Pages 1-1]
Tiwari, Ashutosh
Researcher of the year 2018 - Professor T. Venkatesan: an unified journey of high-throughput nanoscale technology [Volume 9, Issue 12, 2018, Pages 831-835]
Tiwari, Ayushi
Facile Electrostatic Immobilization of Glucose Oxidase onto Citrate Capped Gold Nanoparticles for Surface-enhanced (Bio)-Catalysis [Volume 9, Issue 11, 2018, Pages 823-830]
Torres, David
Programming emissivity on fully integrated VO2 windows [Volume 9, Issue 6, 2018, Pages 406-410]
Toshimitsu Yokobori, A.
Hydrogen concentration behavior of y-grooved weld joint based on a coupled analysis of heat transfer - thermal stress - hydrogen diffusion [Volume 9, Issue 10, 2018, Pages 677-683]
Tounsi, Amel
Study of the properties of La-doped ZnS thin Films synthesized by Sol-gel method [Volume 9, Issue 3, 2018, Pages 216-219]
T. Paganoto, Giordano
PtSn/C electrocatalysts modified with Ni and Ga for the ethanol electrooxidation [Volume 9, Issue 12, 2018, Pages 895-901]
Trachevskyi, Viacheslav
Formation of carbon sp3 hybridization bonds in local electric fields of composites “polymer-CNT” [Volume 9, Issue 4, 2018, Pages 296-300]
Tsugawa, Naoya
Temperature-sensitive smart polymer with self-controlled glass transition temperature [Volume 9, Issue 12, 2018, Pages 872-875]
Tsurtsumia, O.
Nucleation and growth of carbon nanoforms on the surface of metallic plate-substrates and the mechanism of their doping with the clusters of ferromagnetic atoms [Volume 9, Issue 12, 2018, Pages 867-871]
Tsurtsumia, Olga
Investigation of new antifrictional/frictional nanocomposites based on PTFE matrix filled with Fe-doped carbon nanoparticles [Volume 9, Issue 5, 2018, Pages 320-325]
Tsutaoka, Takanori
Percolation-induced low frequency plasmonic state in metal granular composite materials [Volume 9, Issue 7, 2018, Pages 476-480]
U
Ubaid, Fareeha
Structural and mechanical properties of CeO2 reinforced Al matrix nanocomposites [Volume 9, Issue 8, 2018, Pages 602-605]
V
Vaclavik, Vojtech
Effect of selected cellulosic fibers on the properties of cement based composites [Volume 9, Issue 8, 2018, Pages 606-609]
Valentina, Hodorenko
Impact of infrared radiation on oxide layer of ultrathin TiNi-based alloy wire [Volume 9, Issue 10, 2018, Pages 715-720]
Valova, Eugenia
Electroless deposition of nickel on biocompatible poly(dimethylsiloxane) after a laser processing as a pretreatment [Volume 9, Issue 2, 2018, Pages 101-106]
V. Ardila Antolínez, Jessica
Effect of the BMIM BF4 immobilization on oxidized activated carbon in fuel desulfurization [Volume 9, Issue 7, 2018, Pages 488-493]
Varizhuk, Anna
G4 self-assembly as an intrinsic nucleic acid function [Volume 9, Issue 2, 2018, Pages 91-96]
Vasilev, Krasimir
Nanoengineered plasma polymer films for biomedical applications [Volume 9, Issue 1, 2018, Pages 42-52]
V. Eletskii, Alexander
Surface reinforcement of metals by carbon nanomaterials followed by high intense energy irradiation [Volume 9, Issue 10, 2018, Pages 733-736]
Verma, Vivek
Synthesis and characterization of pure BiFeO3 using various complexing agents by Sol-gel method [Volume 9, Issue 11, 2018, Pages 805-810]
Vernardou, D.
Effect of deposition temperature on the electrochromic properties of WO3 grown by LPCVD [Volume 9, Issue 3, 2018, Pages 192-198]
Vernardou, D.
The effect of growth time and oxygen flow on the properties of electrochromic WO3 thin layers grown by LPCVD [Volume 9, Issue 8, 2018, Pages 578-584]
V. Finotelli, Priscilla
Palm oil fatty acids and carotenoids extraction with lipase immobilized in magnetic nanoparticles [Volume 9, Issue 9, 2018, Pages 643-646]
V. Grigoriev, Aleksei
Thermal plasma spheroidization of Nb-16Si powder alloy obtained by mechanical alloying [Volume 9, Issue 1, 2018, Pages 86-90]
Victor, Gunther
Impact of infrared radiation on oxide layer of ultrathin TiNi-based alloy wire [Volume 9, Issue 10, 2018, Pages 715-720]
Vijeth Shetty, R.
Naphthol bis-indole derivative as an anode material for aqueous rechargeable lithium ion battery [Volume 9, Issue 8, 2018, Pages 594-601]
Vishakantaiah, Jayaram
Experimental investigation of oxidation resistance of SiC powder for the protection of re-entry space vehicle using material shock tube [Volume 9, Issue 7, 2018, Pages 510-515]
Vishwakarma, Amit
Enhanced microwave absorption property of aluminum composites using fly ash derived cenosphere [Volume 9, Issue 4, 2018, Pages 241-248]
V. Khedekar, Vardhaman
Graphene-metal oxide nanocomposites for supercapacitors: A perspective review [Volume 9, Issue 1, 2018, Pages 2-19]
V. Motloung, Setumo
Effect of reaction time on LiMn2O4 nanostructures prepared by modified chemical bath deposition method [Volume 9, Issue 10, 2018, Pages 703-707]
V. Nandanwar, Deoram
Polypyrrole/MnO2 nanocomposites as potential electrodes for supercapacitor [Volume 9, Issue 8, 2018, Pages 538-543]
Volchkov, Stanislav
Biocompatible features of magnetic nano-oxide core/ PCL shell 3D composites fabricated via SLS/M process [Volume 9, Issue 1, 2018, Pages 31-35]
Volova, Larisa
Biocompatible features of magnetic nano-oxide core/ PCL shell 3D composites fabricated via SLS/M process [Volume 9, Issue 1, 2018, Pages 31-35]
V. Samokhin, Andrey
Thermal plasma spheroidization of Nb-16Si powder alloy obtained by mechanical alloying [Volume 9, Issue 1, 2018, Pages 86-90]
V. S. Luz, Glécia
Assembly and characterization of ZnO nanoparticles for Grätzel's solar cells [Volume 9, Issue 4, 2018, Pages 284-290]
V. Uvarov, Alexander
Surface reinforcement of metals by carbon nanomaterials followed by high intense energy irradiation [Volume 9, Issue 10, 2018, Pages 733-736]
V. Vázquez, G.
Waveguide-detector system on silicon for sensor application [Volume 9, Issue 2, 2018, Pages 116-122]
W
Wallace, Tylisia
Fabrication and magnetic properties of Sol-Gel derived NiZn ferrite thin films for microwave applications [Volume 9, Issue 5, 2018, Pages 345-352]
Wang, Changhai
Design of a novel three arm electrothermal microgripper with multiple degrees of control [Volume 9, Issue 10, 2018, Pages 692-695]
Wang, Chao
Reducing edge effect of temperature-field for large area thin film deposition in hot filament chemical vapor deposition system [Volume 9, Issue 10, 2018, Pages 727-732]
Wang, Gou-Jen
Template-assisted fabrication of tunable aspect ratio, biocompatible iron oxide pillar arrays [Volume 9, Issue 4, 2018, Pages 249-257]
Wang, Qinglin
Generalized predictive control for DEAP flexible bionic actuator with fuzzy model [Volume 9, Issue 2, 2018, Pages 132-137]
Wang, Tongyu
Programming emissivity on fully integrated VO2 windows [Volume 9, Issue 6, 2018, Pages 406-410]
Wang, Yidi
Investigation on stability and photocatalysis of perovskites [Volume 9, Issue 8, 2018, Pages 549-552]
Wang, Yingli
The influence of the edge characteristics of detected objects on underwater active electrolocation system [Volume 9, Issue 1, 2018, Pages 81-85]
Wang, Zhijian
ZnSn(OH)6 nanocubes as a high-performance anode for lithium-ion batteries [Volume 9, Issue 12, 2018, Pages 880-884]
Wilson, Marshall
Work function and induced band bending characterization for engineering of selective contact for solar cells [Volume 9, Issue 9, 2018, Pages 629-631]
Wu, Zhibin
ZnSn(OH)6 nanocubes as a high-performance anode for lithium-ion batteries [Volume 9, Issue 12, 2018, Pages 880-884]
X
Xiao Guo, Zheng
Synthesis and modelling of nanoparticles for chemical looping reforming [Volume 9, Issue 6, 2018, Pages 439-443]
Xin, Hongbao
Fibre-optic trapping and manipulation at the nanoscale [Volume 9, Issue 8, 2018, Pages 567-577]
Xu, Dan
The future of physical hydrogen storage [Volume 9, Issue 12, 2018, Pages 851-854]
Xu, Xiaohao
Fibre-optic trapping and manipulation at the nanoscale [Volume 9, Issue 8, 2018, Pages 567-577]
Xudong, Yang
Effect of electrode material on piezoelectric output of PVDF sensor with electrospun nanofiber web [Volume 9, Issue 5, 2018, Pages 363-368]
Xue, Qin
Effect of Al on the columnar-to-equiaxed transition for Ti-6%Al and Ti-45%Al by cellular automaton [Volume 9, Issue 12, 2018, Pages 889-894]
Y
Yakimchuk, Evgenyi
Stability of graphene suspensions in an aqueous based multi-component medium [Volume 9, Issue 3, 2018, Pages 211-215]
Yamaguchi, Masayuki
Temperature-sensitive smart polymer with self-controlled glass transition temperature [Volume 9, Issue 12, 2018, Pages 872-875]
Yang, Qian
ZnSn(OH)6 nanocubes as a high-performance anode for lithium-ion batteries [Volume 9, Issue 12, 2018, Pages 880-884]
Yang, Wein-Duo
Synthesis of rGO via UV-assisted photocatalytic reduction of graphene oxide [Volume 9, Issue 6, 2018, Pages 436-438]
Yi Jie Ching, Preston
Microwave-assisted synthesis and mechanistic study of multicolor emissive Au nanoclusters using thiol-containing biomolecules [Volume 9, Issue 9, 2018, Pages 647-651]
Yinda, Zhu
Effect of electrode material on piezoelectric output of PVDF sensor with electrospun nanofiber web [Volume 9, Issue 5, 2018, Pages 363-368]
Ying Jie, Qiao
Synthesis of rGO via UV-assisted photocatalytic reduction of graphene oxide [Volume 9, Issue 6, 2018, Pages 436-438]
Yoshida, Ryo
Self-oscillating polymer gels as biomimetic and smart softmaterials [Volume 9, Issue 12, 2018, Pages 836-842]
Yu, Yong
Microwave-assisted synthesis and mechanistic study of multicolor emissive Au nanoclusters using thiol-containing biomolecules [Volume 9, Issue 9, 2018, Pages 647-651]
Yuanyuan, Gu
Effect of electrode material on piezoelectric output of PVDF sensor with electrospun nanofiber web [Volume 9, Issue 5, 2018, Pages 363-368]
Z
Zalevsky, Zeev
Sensitivity enhanced photo-thermal borders detection in bio-phantoms enriched with gold nanoparticles [Volume 9, Issue 7, 2018, Pages 471-475]
Zhang, Min
Effect of Al on the columnar-to-equiaxed transition for Ti-6%Al and Ti-45%Al by cellular automaton [Volume 9, Issue 12, 2018, Pages 889-894]
Zhang, Ting
Properties of the photochromic latexes based on spiropyran by emulsion polymerization [Volume 9, Issue 2, 2018, Pages 97-100]
Zhang, Yanyu
Preparation of polymer nano-photocatalysts by using triton X-100 to improve performance of photocatalytic hydrogen generation [Volume 9, Issue 5, 2018, Pages 326-330]
Zhao, Haimin
ZnSn(OH)6 nanocubes as a high-performance anode for lithium-ion batteries [Volume 9, Issue 12, 2018, Pages 880-884]
Zheng, Jinwen
Generalized predictive control for DEAP flexible bionic actuator with fuzzy model [Volume 9, Issue 2, 2018, Pages 132-137]
Zhi, Jinfang
Facile synthesis of graphene quantum dots based on electrochemical method and their application for specific Fe3+ detection [Volume 9, Issue 9, 2018, Pages 614-618]
Zhou, Yulan
Effect of Al on the columnar-to-equiaxed transition for Ti-6%Al and Ti-45%Al by cellular automaton [Volume 9, Issue 12, 2018, Pages 889-894]
Zhu, Yayun
Hydrogenated TiO2 as efficient electron transport layer of planar perovskite solar cell [Volume 9, Issue 6, 2018, Pages 419-425]
Zuev, Lev
On the deformation behavior of bi-metal via digital image correlation [Volume 9, Issue 1, 2018, Pages 20-24]
