@article { author = {M. Seyf Eddine, Bougoffa and Sayah, T. and Bey M. Nabil, Bachir and Chahrazed, Benouali}, title = {An Assessment of Tribological Characteristics under different Operating Condition}, journal = {Advanced Materials Letters}, volume = {11}, number = {2}, pages = {47-51}, year = {2020}, publisher = {International Association of Advanced Materials}, issn = {0976-3961}, eissn = {0976-397X}, doi = {10.5185/amlett.2020.021478}, abstract = {The paper evaluates and compares the friction and wear behavior of SAE-AISI 1060 steel and brass (CuZn37Pb2) at different initial surface roughness and normal load using pin-on-disc test. Tribological behavior of studied materials was analyzed in detail. Variation of coefficient of friction at different initial surface roughness and normal load has been correlated with wear loss, wear rate, track width. Experiments are carried out in normal load 3-5-8-10 N, sliding speed 0.24-0.35m/s and 0.48 m/s, wear track diameter 4-6-8-10 mm. Results show that friction coefficient, wear loss and wear rate of steel increase with track width at high initial surface roughness and normal load. For brass friction coefficient decreases with the increase of normal load. On the other hand, it is also found that wear loss, wear rate and track width increase with sliding distance. Microscopic of worn surfaces for each alloy were carried out and compared.}, keywords = {Tribological behavior,friction coefficient,wear loss,roughness,wear rate}, url = {https://aml.iaamonline.org/article_13959.html}, eprint = {https://aml.iaamonline.org/article_13959_3bc92e1760e70fec2dd4b39b9fb5e1a9.pdf} }